Clock help please

[GeorgePayne92]

What do I need to change my clocks from a 1.2 to Sri clocks with the rev counter ??

[mk1nova_rich]

mk1 or mk2?

[GeorgePayne92]

mk1 or mk2?
Sorry mk2

[mk1nova_rich]

check there are all 14 wires in the plug at the back of the clocks. If so just plug this into the SRi clocks and away you go

[Nova_Sean]

dont need to change anything. Pull the 14pin plug out the back of your standard clocks, and look for a green wire. If you dont have one you will need to run a wire from the coil into the plug on the correct pin number. Jack has posted the pin numbers in how to fit cav/cally dials article.

[GeorgePayne92]

Cheers you got a link ?

[mk1nova_rich]

the wiring info is also in the haynes manual IIRC. Check your plug first, the green wire is usually there already on Mk2s

[Nova_Sean]

its in the articles section. Im on my fone cant copy and paste it

[mk1nova_rich]

check the wiring in your plug first mate, if nothing needs doing the wiring article isnt needed lol

[GeorgePayne92]

You know how to change the mileage ??

[Nova_Sean]

facepalm

[mk1nova_rich]

yes you need to swap the speedo unit. Pull the needle off carefully then undo the two small screws on the speedo face and swap with the smaller speedo face from the SRi speedo then fit back into the clocks

[Stuart]

I wouldnt take the needle off!!!!! it will NEVER go back on in the right place and the speedo will be even mroe epicly out.

altering the milage is so so so so so easy, have a look at the clocks and work it out. Really its not hard.

[General Baxter]

drill it for 10 hours lol

[GeorgePayne92]

drill it for 10 hours lol

does that work ?

[novasrikev]

yes it does