Log in

View Full Version : xe wiring help please


SRlew
21-03-10, 11:16 AM
found a singal pin plug on the xe's loom looks like its be cut and extended maybe, the only plug i can see it connects to is one that comes throught the right hand side of the black box that sits on top of the fuel rail
what does this need connectin to??

also the 3 pin plug for the lamba sensor where does this connect to? i cant find it

cheers lew

this is into a corsa but im sure that doesnt matter
SRlew
22-03-10, 07:15 PM
anyone?
Adam
22-03-10, 07:30 PM
Lambda sensor plugs into a plug near the grommet where the loom enters the car. Unless its a 20xe with no lambda.

Pic of the plug?? What colours the wire?? Maybe the ignition live feed
SRlew
22-03-10, 07:46 PM
ah right, just got a manifold off a mate with lambda sensor on, and i cant find the plug for it. also the manifold that came with the engine the wire had been cut right back at the sensor
didnt no some didnt need them.

will look near the gromet tomorrow then.

also the single pin plug will get a pic tomorrow, but its a type with the green rubber thing on it so seals it etc if you know what i mean

the plug connects together just after the rest of the loom pases the fuel rail (black box cover hing)

hard to describe so will get pics

chers lew
SRlew
22-03-10, 07:58 PM
ok turns out its an early type and i dont need the lambda

but still this single pin plug, pics 2moro
SRlew
23-03-10, 06:21 PM
the plugs that come out of there got to the dizzy and think other is for coil
http://i6.photobucket.com/albums/y217/srlew/PICT0623.jpg

then theres this one?

http://i6.photobucket.com/albums/y217/srlew/PICT0622.jpg
Benn
23-03-10, 06:26 PM
That's the constance 12v no?
SRlew
23-03-10, 06:33 PM
i found one that connects into that but the wire from it just runs on the out side of the loom and is cut but where the look goes into the car (bulkhead)
Damo
23-03-10, 06:34 PM
That's the constance 12v no?

Yea think thats the ignition live mate.
SRlew
23-03-10, 06:37 PM
ah right ok, cheers chaps!

also theres a thick red in the loom somewhere, that just a perm live??
Benn
23-03-10, 07:05 PM
You wont have the other side connector, as that will be on the Astra car loom.

Your best bet is to find a perm 12v and join it too it.

If it is 100% the perm 12v
Damo
23-03-10, 07:20 PM
ah right ok, cheers chaps!

also theres a thick red in the loom somewhere, that just a perm live??

Has it got a ring connector on it mate if so then yea thats the batt +.
SRlew
24-03-10, 07:51 PM
You wont have the other side connector, as that will be on the Astra car loom.

Your best bet is to find a perm 12v and join it too it.

If it is 100% the perm 12v

iv goit the other side of the connector, it looks like its been taken from a car as its just running along the loom to inside the car then not conected to anything

will just connect it up to an ignition live

cheers lew