PDA

View Full Version : samco hoses



mark_GSi
16-04-03, 04:02 PM
just ordered sum blue hoses,
u get 4, i think these are the coolant 1's

looked in demon tweeks and for the 1.3/1.4 u get bout 5 and lists these as axillary (xcuse my spelling)

wanted more than 4 for my GSI, would these extra 1's for the 1.3/1.4 fit and wot are they for????

thanks

mark

scott5
16-04-03, 10:59 PM
not 100% sure but i would take a guess at them being for the heater.

Aragorn
21-04-03, 06:18 PM
well if u look under the bonnet you'll see there are only a few hoses in there

RAD to metal pipe
thermostat housing to rad
heater in
heater out
header tank feed to metal pipe
and the rad to header tank too

there is also a pipe between the metal water pipe and the water pump inlet

so thats 7 if u wanna do EVERY cooling pipe

last time i looked there was no other pipes on there that could be replaced barring the silly vacuum hoses and fuel lines which i doubt would be silicon friendly

your 4 set will include rad to metal pipe, thermostat to rad and either both header tank hoses or both heater hoses

the header ones are the most visible, the heater ones are round the back so u cant really see em so im guessing it will be the header