PDA

View Full Version : Speedo Query - KPH to MPH



Mike
14-03-10, 10:27 AM
A friend of mine has just bought an Opel Corsa B GSi thats been imported to the UK from Germany, so speedo is in KPH.

Is this be a simple case of getting some UK clocks & speedo drive thingy from the gearbox an simply swapping them over? Or is there more to it then that?

mowgli
14-03-10, 10:31 AM
it should be fine to do that, but

do a test drive to see just what speed it is at, say 3000rpm in top...

then slap a set of GB clocks in and do the same test, just to be sure.

Mike
14-03-10, 10:34 AM
Thats what i was thinking Mow, im quite unsure wether the RPM would actually work properly or not?

General Baxter
14-03-10, 10:34 AM
get a sticker lol

MattBrown
14-03-10, 10:45 AM
get a sticker lol


Lockwood faces over the top:thumb:

Plug
14-03-10, 10:51 AM
the rev counter will work still

Rexy
14-03-10, 11:00 AM
Thats easier than the Jap crap stuff i have to do, Re wire a MPH/KPH converter into the speedo sensor at the gearbox end.

Nova_Tek
14-03-10, 11:50 AM
swapping the clocks should be fine. If you look at the mph clocks they have the kph next to the mph numbers. The kph numbers just repalce the mph ones. You can tast it like Mowgli said.

Graeme
14-03-10, 12:02 PM
Just fit some uk clocks and take a road angel or sat nav to confirm the speed