PDA

View Full Version : 1300 not sparking



mk1nova_rich
13-03-10, 03:35 PM
Just tested HT lead with a screwdriver onto engine and not getting a spark. I did have one briefly earlier as the engine started then cut out and hasnt started since.

I am getting voltage to the coil as the rev counter needle moves as the engine turns on the starter. What could be the problem?

brainsnova
13-03-10, 03:38 PM
is the gearbox earth strap in good condition? a quick way is to put a jump lead between the earth on the battery and the other end on the engine block.

mk1nova_rich
13-03-10, 03:46 PM
how much difference will this make as im not actually sure i have a gearbox earth strap on it

pikey1986
13-03-10, 03:53 PM
dodgy(sp) earths can cause no end of problems

brainsnova
13-03-10, 04:05 PM
in order to get a good spark you need a good earth and without the gearbox earth strap you'll be getting toiling.

Royston
13-03-10, 06:31 PM
Possibly the module in distributor could be dead, symptom is no spark, happened to me twice

Bubba
13-03-10, 06:32 PM
mine did this...but i just hit all the ignition stuff with a bar n it worked fine since :/

mk1nova_rich
13-03-10, 07:22 PM
right it is getting a spark, just, plugs are drenched in petrol :( gona charge battery overnight and let plugs dry out and give it another go tomorrow. Dizzy was out so not firing allowing pots to fill up