Conversion engine mount

[Nova_Tek]

As above.

Need a conversion engine mount to fit the XE/LET. I've managed to source the other bits sperately. Just need this.

Pic to make things easier:
http://img169.imageshack.us/img169/5784/conversionenginemount.png

Let me know what you have and how much inc postage to North London.

Best to reply to the thread or PM (although PM box is nearly full :roll: will try clear some space)

:thumb:

[nova-taken]

any good with a welder?? as theses mounts are p**s easy to fabricate yourself

[napalm_27]

iv got one here mate :thumb:

[Nova_Tek]

any good with a welder?? as theses mounts are p**s easy to fabricate yourself

Na mate no access to welder and not done much welding myself.

[total_vauxhall]

10 quid i can have you one by monday

[Nova_Tek]

10 quid i can have you one by monday

You got a spare one or are you fabricating?

[total_vauxhall]

You got a spare one or are you fabricating?

only got one spare i use for a template but im a welder fabricator so can get one nocked up at work over weekend if you need one

[Nova_Tek]

Is that £10 with postage?

[total_vauxhall]

is that one in your pic one off ebay
i cant understand why they used 2 faggoty bits of 2mm plate for the gussets rather than just one good 3mm full gusset in the center those welds dont look very strong what so ever. and they charge 70 quid for that and a fue spacers.

[napalm_27]

il have one for £10 aswell lol
but need the other style mount not the one pictured

[total_vauxhall]

Is that £10 with postage? na mate 10 quid for the item then say 6 quid postage

[Nova_Tek]

Mate, just saw your thread about it.

Says there that you'll fabricate and post for £12. I'm a reasonable guy so let's meet in the middle at £14 but you send me a pic of the mount and you can guarentee that it'll be an exact match.

How's that sound :thumb:

[total_vauxhall]

15 quid mate its a steel at that price anyway i only can do them for 12 quid if im making say 20 at a time . for instence it will take around 20 mins to make one .and about 50 mins to make 20 . look ill put a fue together over the weekend if you aint got one sorted by monday afternoon ill put some picks up off the finished product . they are better quality that the ones for 69 quid on ebay put it that way lol. no offence to who ever makes the ones on ebay like .

[napalm_27]

can you do the other style one mate..?
really need one like asap to fit my vxr engine in

[Nova_Tek]

15 quid mate its a steel at that price anyway i only can do them for 12 quid if im making say 20 at a time . for instence it will take around 20 mins to make one .and about 50 mins to make 20 . look ill put a fue together over the weekend if you aint got one sorted by monday afternoon ill put some picks up off the finished product . they are better quality that the ones for 69 quid on ebay put it that way lol. no offence to who ever makes the ones on ebay like .

Ok mate, I see where you're coming from. I doubt I'll get one by Monday. Get one done on the weekend post some pics up and I'll take one off you :thumb:

[total_vauxhall]

can you do the other style one mate..?
really need one like asap to fit my vxr engine in

i could but aint got a clue what one looks like or the size / hole centers ect ect would need one to copy off then it wouldnt be a problem:thumb: just been looking at one on mig web an you have to weld the mount to the inner wing / chassis leg . there is bush's and alsorts involved mate lol.

[napalm_27]

ok dont worry then mate bidding on one on ebay atm anyway :thumb:

[total_vauxhall]

as promised .. ignore the plastic fork it was just to keep it stood up lol.
http://i23.photobucket.com/albums/b385/dan_novadose/DSCF4346.jpg
http://i23.photobucket.com/albums/b385/dan_novadose/DSCF4347.jpg
http://i23.photobucket.com/albums/b385/dan_novadose/DSCF4348.jpg

[Nova_Tek]

[Like I said in you other thread] Looks quality and solid. Knock one up and I'll take it dude :thumb:

[total_vauxhall]

that one is yours mate lol

[Nova_Tek]

Thanks dude, that was swift. You've got PM :thumb: