View Full Version : C'LET cooling hoses
Nova_Tek
08-03-10, 05:30 PM
What hoses can be kept from the standard engine (1.2 in this case) to be used with the LET (if any)?
I know some of you may say 'best to get new ones' but more than half my hoses are new (less than 2 years) and they are still very good.
:thumb:
Nova_Tek
09-03-10, 11:17 AM
Ok let me rephrase the question.
Which hoses can't I use / need extra with the LET?
(Thanks Paul at least I know that they can be used)
The turbo water hoses
Rest are just nova ones, same as for a xe afaik. Apart from side of head to heater matrix
Nova_Tek
09-03-10, 12:46 PM
So all I'll need are the turbo hoses and side of head to heater matrix. Coolio. Will start hunting for some of the above hoses.
Cheers Adam
You should get the turbo hoses with the engine tbh...
Nova_Tek
09-03-10, 01:02 PM
Yes I should but these things are never totally guarenteed. So I may aswell have a look around get an idea of who's the best just in case they don't come with the engine.
the one that goes from the bottom of rad to the big black pipe, needs to be a gsi gte sr one i think, as the 1.2 one is a smaller size, and wont fit over the let/xe pipe.
Nova_Tek
09-03-10, 09:59 PM
cheers alan will keep that in mind
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.