1.3 sr 4 branch on a 1.6 gte?

[novalovingned]

Will it work? Are the exhaust ports the same?

[comptoncj]

Mine has had a 1.2, 1.3, and 1.6 exhausts on it chap they all fit the exhaust ports are the same.

[novasrikev]

Will it work? Are the exhaust ports the same?

on the 4 branch ha what i have it has round ports and thats for a 1300

[comptoncj]

on the 4 branch ha what i have it has round ports and thats for a 1300

All 8v exhaust ports are round ish

[novalovingned]

All 8v exhaust ports are round ish


Just what i wanted to here. I did think all the 8v exhaust ports were the same, just wanted to double check. Cheers mate :)

[rubachuk]

It will be fine at the cylinder head end.

However there is a difference between the GTE and SR sytems so make sure you have an exhaust to suit your manifold. I ended up with this when I tried to use an SR manifold with a GTE exhaust:
http://i306.photobucket.com/albums/nn266/rubachuk/IMGP2180.jpg

[grooge]

seconded, I also had that problem.

[novalovingned]

It will be fine at the cylinder head end.

However there is a difference between the GTE and SR sytems so make sure you have an exhaust to suit your manifold. I ended up with this when I tried to use an SR manifold with a GTE exhaust:
http://i306.photobucket.com/albums/nn266/rubachuk/IMGP2180.jpg


AHHHHHH the problem i have just now lol welder out for me it is then lol

[mowgli]

the 4 branch will probable fit the 1.3 system ok.. the gte one is different, but the pipe is the same bore.... the biggest restriction on the std gte downpipe is where the 2 meets the 1, have a looky up inside.. grind that out & it will flow way better