Got a few ponies!!

[Saloony]

http://www.youtube.com/watch?v=sgdGfycw1-8&feature=player_embedded :thumb:

[Tony M]

The last bit is the best, where his back end kicks up lol

[l1nuxxx]

I love the old polos. In a Nova hmmmmm lol

[peester]

christ thats evil.. i watched that with no sound n all lol

[General Baxter]

thats insane

[mayhem]

I love the old polos. In a Nova hmmmmm lol

he misses a gear there, putting in 1st instead of 3rd. still an 9 second run:eek:

[burgo]

how the funk have they got that much power out of it

[sulphur]

Spec translated..?

1.85 l 16 V Turbo Engine achievements: 1047 HP /770 kW and 950 Nm in 7734 Upm with drawer pressure 2.75 cash in 2.1 cash ca. 800 HP of the measurement resulted (see report) in Performance: 1047 hp / 770 kW of and 950 Nm at 7,734 rpm with 2.75 cash boost at 2.1 cash about 800 hp The measurement what maggot (lake report) when www.Kraftprobe.com www.Kraftprobe.com

SPECIFICATION for 700 + bhp version: (2.1 cash boost version)

Performances 1/4 mile: 9,420 sek. Driving 1 / 4 paint: 9,420 scnds. Timeslip 9,568 sek. TIMESLIP 9,568 scnds. Speed 245 km/h with Speed 2.1 cash drawer pressure 245 km/h of at 2.1 cash boost

Performances: Performance: 0 on 100 km/h in 2.3 sek. 0 to 100 km/h in 2.3 scnd. - 0 on 200 in 6.8 sek. - 0 to 200 6.8 scnds. - 0 on 245 km/h in 9,420 sek. - 0 to 245 km/h in 9,420 scnds.

Stale number of revolutions: 9400 RPM Switching speed: 9400 rpm

Maximum speed: in the 6 gear in 9000 RPM over 300 km/h maxima speed: the 6 speed in 9000 rpm over 300 km / h.

Stale notice Switching display

6,6 Gears -transmission: of the Audi TT with barrier and 4 Motion- drive cords Speed gearbox from the Audis TT with and 4 licked-Motion drivetrain

13 inject nozzles: - 13 Injectors:

More adjustable -gasoline pressure regulator - Adjustable fuel press original regulator

Turbolader: Turbocharger: Garrett GT 40R Garrett GT 40R

Exhaust fume more crooked for push charge Exhaust for push charge

Motor block: of the 1.9 TDI with additional block strengthenings - Engine looked, looked from the 1.9 TDI with additional reinforcements

High festivals - High Strength H-profile-AMEN-Pleuel with reinforced screws and Pleuellagern, Pleuellänge 160 mm of H-AMEN-profile connecting with reinforced screws and Conrod large speak end bearings, Pleuellänge 160 mm

Piston: Pistons: AMEN smith piston with 82.5 mm diameters special preparation AMEN forged pistons with 82.5 mm of diameter special order

Crank shaft with 86.4 mm strokes Crankshaft with 86.4 mm of stroke

Aluminum oil tub and Ölhobel aluminum oil tub and Ölhobel

Processed cylinder head with reinforced Ventilfedern, converted to stiff Tassenst ßel Worked with increased cylinder valve springs, converted to rigidly Tassenstßel

On camshafts and outlet camshafts custom-made item with different tax times for entrance and outlet A outlet camshafts and individual tax preparation with different times for entry and exit

Adjustable camshaft wheel and chain wheel Adjustable camshaft and Sprocket

Take in system: special Intake: special take in bridge and take in pipes AMEN special preparation Inlet Manifolds and intake manifolds AMEN special preparation

Air collector: Custom-made item out of aluminum with four take in funnels, (column pipette) Air Collectors: Individual producing aluminum with four stick, (column pipette)

Inject plant: free programmable Injection system: freely programmable 2x AMEN Motronik 2x AMEN Motronik 2.65 2.65 Einspritz- and ignition system Injection and ignition system

Exhaust plant: Special preparation with going through 76 mm cross-sections Exhaust system: special production with continuous 76 mm of cross section

Pop of off valve pop off valve

Drawer air cooler: Water/air cool system special preparation Intercooler: water / air cooling system is custom maggot

AMEN-water/methanol injection AMEN-water/methanol injection

Coupling: Flywheel turned off Sinta bring disk special it RS2 by the G 60 and reinforced AMEN printing plate Clutch: Plate AMENS press original Sinta bring disk special it RS2 fly off from the G 60 and increased

Load work: Thread load work chassis: Chassis Thread

Tire: Aluminum rims 15-inch with M H of Slicks or 16-inch rims with 205/55 16 street tires Tires: 15-inch Aluminum rims with M + H of slicks or 16 inch wheels with 205/55 16 road tires

Exhaust fume temperature measurement Exhaust temperature and also yet many trifles more and Eves many more minor

Weight: 920 kg with driver Weight: 920 kg of with driver

[NovaLad]

That's freaking awesom!

[novaload1992]

cool!!

[dj_wudgey]

yea ive seen this before its some beast!!!