PDA

View Full Version : big block front engine mount!! nova one for corsa one


napalm_27
05-03-10, 06:41 PM
as above iv got a corsa one on the nova :tard: some **** obviously fitted it
and it wont bolt to the vxr engine
need a proper nova one so it clears the cambelt cover :thumb:
will swap my corsa one for a nova one
need one ASAP!!
djbrowney
05-03-10, 06:42 PM
if a corsa one wont fit then a nova one defo wont fit lol
napalm_27
05-03-10, 06:50 PM
read it again
the corsa one are a different shape to the nova one
thats why it wont fit
as the corsa one hits the cambelt cover as its angled the nova ones have that bit cut out
napalm_27
08-03-10, 04:51 PM
the corsa mount i have.. need a nova one asap!! even willing to buy one!!
http://i478.photobucket.com/albums/rr142/napalm_27/06032010441.jpg
http://i478.photobucket.com/albums/rr142/napalm_27/06032010442.jpg
djbrowney
08-03-10, 06:16 PM
that is not a corsa mount buddy ^ that is a very early nova 2.0 conversion one. i run the very same mount on my engine !
napalm_27
08-03-10, 06:18 PM
that is not a corsa mount buddy ^ that is a very early nova 2.0 conversion one. i run the very same mount on my engine !

well all the nova ones ive seen are different so this to me its a corsa one and it doesnt fit the vxr so its no use to me so its got to go :thumb:
djbrowney
08-03-10, 06:29 PM
well all the nova ones ive seen are different so this to me its a corsa one and it doesnt fit the vxr so its no use to me so its got to go :thumb:

mine is at the lazer cutter if not i would take a picture of it an show you, just bec you havent ever seen it before dosnt mean it not a nova one :cool: if you buy another nova mount all the bolt holes will be in the same place :cry:
napalm_27
08-03-10, 06:36 PM
well its not that its the bit thats angled on it were the new style one is seperated this is a complete bit if you understand
djbrowney
08-03-10, 06:38 PM
so the backing plate of the cam belt sticks out to far and you need clearance lol !
napalm_27
08-03-10, 06:42 PM
yer practically mate

were the one thats a 90' angle it clears it but this is like a 45'ish angle to the mount so it hits it
the holes line up perfect but just about half an inch from sitting flush
djbrowney
08-03-10, 06:45 PM
i have a really funny feeling it not going to fit on a standard mount mate !
napalm_27
08-03-10, 06:56 PM
well theres only one way to find out really mate