nova c20xe to f16 shafts and mounts

[turnipheed]

hi
im fitting a c20xe and f16 into my nova and i have a few questions

1, what inner cv and shaft do i need to take it from f16 to my nova hubs
2, what mount do i need for the gearbox (f16)
3, is ther any vauxhall mounts that i can use to mount the engine or am i better getting a mount kit from flebay
4, does the gear box spacer that comes with most of these mount kits refer to use with the f20 or can it/does it need to be used on the f16

ps
dont need anti roll bar blocks as i dont have one lol
any help would be appreciated

[comptoncj]

You will need early cav 1.6 inner cvs IIRC also fitted to a dewoo of some description lol and 22 spline (gte gsi diesel) driveshafts. ive got one inner cv that was only fitted once never used on the road here if you need it. look on ebay for the mount kits.

[tashley6]

f16 mounts same as f20 pritty much same casing for box and you can use spacer for rear box mout or washers(bodge) but works! for front engine mout you will have to bye one mate!! saves time! and 1600cc mk2 cav inners with gsi/gte drive shafts for standard hubs hope this helps

[turnipheed]

thank you time to trawl ebay etc lol

[tashley6]

put an add on here for mount, someone will have got 1 for a sert!!

[Damo]

Mount kits £35 quid off ebay mate and you can either use Nova GTE/GSI shafts an mate them to mk2 cav 1.6 bigblock inner cv's or buy some conversion shafts and use big block outer cv's with uprated hubs.