View Full Version : Fuel regulator ports
mk1nova_rich
03-03-10, 10:23 PM
Could someone please identify the three ports on my fuel regulator. The ones on the bottom and back are 8mm and the one on top is around 4mm??
http://i669.photobucket.com/albums/vv57/mk1nova_rich/IMGP1851.jpg
bottom one is fuel in and side one is fuel out-towards the tank. if not then its the other way around. the small one is the vacuum. and the top one with the nut on it is the adjsting screw. is that an egay fpr?
mk1nova_rich
04-03-10, 06:12 PM
yeh it came with a facet pump i bought. what i really want to know is can i use this with bike carbs that dont have a fuel return?
hmm. what carbs are you running? a bike pump like an r1 one would not be beter no? you could use this on the inlet line. but i dont no if itll run low enough pressure. carbs dont need to run much psi atall
mk1nova_rich
04-03-10, 06:45 PM
fireblade carbs. yeh iv just been told it wont go low enough, i will just have to get a filter king type regulator.
something like this should do the job!
http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=ROAD&pcode=FSEPRO53
mk1nova_rich
04-03-10, 08:52 PM
will that be ok to run with a standard 1300 mechanical fuel pump?
mk1nova_rich
04-03-10, 08:59 PM
cheers for your help, rep added :)
no bother, get some pics up;) i have a fetish for bike carbs:thumb:
want to bump this
how do i connect this up?
i have the fuel line coming from the tank..
i have the fuel reg blanking plate on my rail
and have this.
also want to conenct the gauge up.
anyone got pics?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.