PDA

View Full Version : Massive list of parts - all has to go!!!!


benw456
02-03-10, 08:52 PM
SO MANY PEOPLE ASKING FOR PICS - ILL GET THEM UP TOMORROW 03/03/10


ALL PARTS FOR SALE AND HAVE TO GO!!!! NEED TO CLEAR THE SPACE!!!

Sr Grille with SR badge £30

2.0 Brakes £25

Corsa C SXI Wheels £120

GTE Side Skirts £30

Top tint windscreen £20 x3

Window surrounds £30

Rear window surrounds £10

Richbrook Steering wheel and snap off steering wheel boss £100

Clocks with white dials £25

Air to fuel ratio gauge £20

Coscast C20XE cylinder head £200

Roose Motorsport silicon Hoses (red) £120

Motorsport Drive Shafts and Motorsport Hubs £130

GTE anti roll bar £20 x2

GTE rear Bumper £30

Machined Bottom pulley to suit Nova £15

Rear beam £20 x2

Non Sunroof Roof skin £25

Mk1 Clear indicators and front lights £25

Full Magnex stainless exhaust £100

Gsi inner door handles (the but that opens the door from the inside) £10

Full set of door seals and boot seal £15

Close ratio F16 box £50

C20xe thermostat housing £15

C20xe sump £10

C20xe inlet £10

Dispac loom, ecu, coilpack, leads and exhaust cam end plate £150

C20xe 22 spline shafts with inners changed £100

Nova GTE engine in bits, head freshly skimmed £70

F13 Gte gearbox £40

GTE passenger rear skirt piece £5

Iv got a couple of digi dashed with transducers £50 each

Momo apachi steering wheel and boss £60

15" alloys (I think they are mim) £60

15" excite alloys with tyres but 2 required - £50

17" OZ super t's - no tyres - £50

4 individual Speedline Mistrals - 17" - proper et49 - £50 each

19" Imola alloy wheels - No tyres - £120

17" 5 stud tsw alloys - No tyres - £50

Nova SR steering wheel £20

Calibra Turbo steering wheel £30

Nova GSi tank £30 X2

Nova Gsi external fuel pump £20 X2

F20 Gearboxes £50 X2

Nova GTE skirts - been painted - £20

Nova GSi Black dash £80

Black delocked drivers door - £40

Nova GTE engine, box, loom, ecu £100

Nova central locking, loom, electric windows and switches £60

Nova central locking motors and loom - £30

Afterburner rear lights £25

60mm lowering springs £30

Mk2 Headlights and clear indicators -£20

Grey door cappings and full length quater panels £30



Any questions get in touch, need this stuff shifting!! Willing to do a deal for the lot!!
let_nova
02-03-10, 08:54 PM
pics of mistrals please intrested in whole set
bmw156
02-03-10, 08:55 PM
PM sent
benw456
02-03-10, 09:02 PM
The mistral are all 4 stud. Three of them are with the big clip in centre caps and one has the smaller push in centre cap.
vaughanmc
02-03-10, 09:03 PM
Pictures of the OZ wheels ?
vaughanmc
02-03-10, 09:03 PM
And the TSW wheels...
benw456
02-03-10, 09:04 PM
Google it mate! Oz supertourismo alloys, they are a little curbed round the edges.
vaughanmc
02-03-10, 09:04 PM
I know what they look like, I want to see YOUR set though
benw456
02-03-10, 09:05 PM
Ok, will have to be tomorrow now.
vaughanmc
02-03-10, 09:07 PM
What TSW wheels is it as well ?
benw456
02-03-10, 09:08 PM
Im unsure pal - they are either 6 or 7 spoke with a centre cap thats held on with a big nut. Ill try to get as many pics as i can tomorrow. ;)
vaughanmc
02-03-10, 09:09 PM
Cheers :)
Rysee
02-03-10, 09:10 PM
What engine is the bottom pulley from?
Josh_535
02-03-10, 09:11 PM
hi mate £10 on rear window surrounds posted ok?
benw456
02-03-10, 09:11 PM
2.0 Xe mate.
CoolTiger
02-03-10, 09:21 PM
you got the little rods that go from central locking motor to locking rod ?
let_nova
02-03-10, 09:22 PM
pics of mistrals when you can mate
benw456
02-03-10, 09:44 PM
you got the little rods that go from central locking motor to locking rod ?

Yes mate, all there.
CoolTiger
02-03-10, 09:52 PM
fancy splitting lol
benw456
02-03-10, 09:56 PM
fancy splitting lol

Could do with selling it all complete really mate, bit useless if they wont unlock the doors! lol
Alanmc
02-03-10, 10:20 PM
Price for sideskirts and rear window surrounds posted please mate pm me if you need to
benw456
03-03-10, 07:02 PM
Ok - heres a few pics as it started going dark

Mistrals

http://i20.photobucket.com/albums/b213/benw456/DSC00774.jpg

Oz alloys

http://i20.photobucket.com/albums/b213/benw456/DSC00770.jpg

http://i20.photobucket.com/albums/b213/benw456/DSC00771.jpg

17" 5 stud tsw alloys (there is a set of 4)

http://i20.photobucket.com/albums/b213/benw456/DSC00768.jpg

Afterburner rear lights

http://i20.photobucket.com/albums/b213/benw456/DSC00766.jpg

Apache steering wheel (comes with boss too)

http://i20.photobucket.com/albums/b213/benw456/DSC00767.jpg

GTE rear bumper

http://i20.photobucket.com/albums/b213/benw456/DSC00769.jpg

19" imola alloys (there is a set of 4)

http://i20.photobucket.com/albums/b213/benw456/DSC00772.jpg

Nova GTE engine, box, loom, ecu and 4 branch

http://i20.photobucket.com/albums/b213/benw456/DSC00780.jpg

Grey door cappings and rear quaters

http://i20.photobucket.com/albums/b213/benw456/DSC00778.jpg

2.0 litre brakes

http://i20.photobucket.com/albums/b213/benw456/DSC00777.jpg

15" (i think they are mim alloys - set of 4)

http://i20.photobucket.com/albums/b213/benw456/DSC00775.jpg

15" EXCITE alloys

http://i20.photobucket.com/albums/b213/benw456/DSC00781.jpg

Black sprayed gte sideskirts

http://i20.photobucket.com/albums/b213/benw456/DSC00782.jpg

Delocked drivers door

http://i20.photobucket.com/albums/b213/benw456/DSC00783.jpg
benw456
03-03-10, 07:08 PM
Look at all the stuff - cant move anymore so need this stuff moving!

http://i20.photobucket.com/albums/b213/benw456/DSC00776.jpg
deanwilko
03-03-10, 07:09 PM
pm'd
nova1992
03-03-10, 07:19 PM
Did you get a picture of the Full Magnex stainless exhaust system mate?
benw456
03-03-10, 07:26 PM
No not yet, will try and get more tomorrow.
nova1992
03-03-10, 07:33 PM
Ok what sort of condition is it in mate?
vaughanmc
03-03-10, 07:50 PM
PM'd about the GTE Bumper :)
Josh_535
03-03-10, 10:27 PM
pm'd
benw456
06-03-10, 03:21 PM
Up, not even one sale yet. Ebay is looming :roll:
Josh_535
07-03-10, 12:29 AM
hi mate interested in the mim and or the excite alloys if you could arrange courier at price also what tyre size is on them at current time
benw456
08-03-10, 05:51 PM
Up......
napalm_27
08-03-10, 05:55 PM
whats the offset of the OZ's
djbrowney
08-03-10, 06:11 PM
pics of shafts and the rear door cards full height meaning they fold under the window rubber cheers !
l1nuxxx
08-03-10, 06:24 PM
PM'd mate
vaughanmc
08-03-10, 06:27 PM
Answer your PM's and you might get a sale :)
l1nuxxx
08-03-10, 06:30 PM
I have PM'd you about a gearbox mate, Is your inbox full perhaps?
LEWI007
08-03-10, 07:37 PM
How much do you want to post the painted skirts ? a tenner ?
MattBrown
13-03-10, 09:22 PM
Red hoses and Box, £120 collected asap?

I gather hoses are new?

And its both kits?

The coolant and ancilleries?
blackers999
13-03-10, 10:22 PM
have you got a full gsi or gte loom
Nova_Tek
13-03-10, 10:28 PM
Hi mate, this machined bottom pulley, is it to replace the poly V with a single V pulley on the XE/LET engines?

Pic of said part?
nuno_gt
13-03-10, 10:36 PM
Hi m8, I may be interested in the GTE Anti roll bar. My question is: do you have the front only or do you have both front and rear?

I may also be interested in the Magnex system as long as it's specifically designed to a GSI model.

Another thing and may be the most important: shipping costs to Portugal on the above?

Cheers
benw456
14-03-10, 09:40 AM
whats the offset of the OZ's

Im not sure mate - will look for you.
benw456
14-03-10, 09:42 AM
pics of shafts and the rear door cards full height meaning they fold under the window rubber cheers !

The shafts have gone im afraid mate. Yes the rear doorcards go all the way up to the window rubber.
benw456
14-03-10, 09:45 AM
How much do you want to post the painted skirts ? a tenner ?

Yeah if you still want them then ill post for that.

Ben
benw456
14-03-10, 09:47 AM
Red hoses and Box, £120 collected asap?

I gather hoses are new?

And its both kits?

The coolant and ancilleries?


The hoses are in good condition - not new and do need a clean. There is all the coolant hoses in the set. The only thing is is that the car they came from was running no heater matrix so the two matrix pipes have been cut and joined together.
Nova_Tek
14-03-10, 09:47 AM
Hi mate, this machined bottom pulley, is it to replace the poly V with a single V pulley on the XE/LET engines?

Pic of said part?

^^ :thumb:
benw456
14-03-10, 09:47 AM
have you got a full gsi or gte loom

No full looms - sorry.
benw456
14-03-10, 09:49 AM
^^ :thumb:

Was just geting to your message next! Its a v belt bottom pulley with the power steering v machined off to fit under the inner wing of a nova.

Ill get a pic if you want later on.

Ben
benw456
14-03-10, 09:50 AM
Hi m8, I may be interested in the GTE Anti roll bar. My question is: do you have the front only or do you have both front and rear?

I may also be interested in the Magnex system as long as it's specifically designed to a GSI model.

Another thing and may be the most important: shipping costs to Portugal on the above?

Cheers

I only have a front anti roll bar in afraid. Yes the magnex system is designed for a gsi model. Im unsure of postage to portugal - can anyone help?
Nova_Tek
14-03-10, 09:52 AM
cool mate, pics would be lovely. Thanks