e16 se wireing plugs

[stevie78]

Any body tell me what these two plugs could be for:confused: Ihave put all other plugs onto engine and these two are left . They are down the back of the block but cant seem to find a location for them. The next one on the loom is a small round one with three pins in a triangle shape thought that was the digi sender for the speddo . but i thought gsi \gte had mechanical senders?

http://i140.photobucket.com/albums/r1/stevieg_03/nova006-2.jpg

[bazil]

there aint no speedo plug on your loom, your right there manual, im not sure mate.

[comptoncj]

The single pin one looks like the oil pressure sender so is the other one for a knock sensor?? just a guess

[craig green]

What colours are the wires inside the loom wrap, going to each plug. Looks like oil press though (single pin)

[stevie78]

SMALL SINGLE IS GREEN/the bigger of the two is a 3 pin with black yellow/a blue and bare wire wraped round like a ariel coaxl

[bazil]

did the e16se have a knock sensor?

[stevie78]

dnt even know what it is lol

[bazil]

i dont think they did have one, iirc the c16 did. im up looking at mine tomorrow night and ill ave a look.

[stuartfry]

crank shaft sensor? i know the bosch E16se dont have them but the GM black dizzy might?

[stevie78]

mines orange cap m8

[novasrikev]

is it temp sensor and the single pin for 02 sensor pal

[Cheeze]

I think some of the engine had a sensor right on the back on the block stevie, its under the inlet manifold, i know i have had a few with one there, not the easiest t=thing to see mind you!

As for the single one, im not sure on that

[stevie78]

still stumped lol got a pro on it now tho

[Sloth]

the singe one is the oil pressure sender, the twin is the crank sensor. id say you have a late loom on an early motor.

[stevie78]

i was starting to think that myself m8