1400sr engines

[Connor]

Daft question but are they hard to get hold of
as in the 13sb's are quite hard to find a decent one
also if i got one what would you recommend me to do to it
(on a student budget)

cheers in advance
Connor :thumb:

[puss puss]

correct me if am wrong

sr is on carb right? if so i think they are quite hard to get hold off.

1400 sri is also the same engine in the corsa (correct me if am wrong) and is common as muck :)

[Connor]

yeah, 1400sr is carb
not really fancy 1400sri
i would rather the 1600 gsi engine instead

[Jon_nova1]

yes they are quite hard to get hold of, even harder is getting hold of the ignition loom

[John]

Yep getting quite rare, the stock rod/hot rod boys snap em up.

[Andy]

1300's get snapped up by the autograss class 1 fellas
1400's appear quite often but alot have parted company with their ignition setup as its used for running carbs on gte/gsi lumps

[kent14sr]

You can run a 1400 on 1200/1300 dizzy and coil if you replace the cam with a kent/piper etc with both types of dizzy drive on the end.

[mark69]

You can run a 1400 on 1200/1300 dizzy and coil if you replace the cam with a kent/piper etc with both types of dizzy drive on the end.

ive got a 1400 running kent ast1 cam, standard 1200 dizzy, coil etc and it runs fine. :thumb:

[General Baxter]

iv got a 1.4 block here, if your good with a welder lol

[General Lee]

yes they are quite hard to get hold of, even harder is getting hold of the ignition loom

i have a spare ignition loom for 1.4 sr if anybody needs one.