nova, c20xe, c20let parts + z32se v6 parts

[david dixon]

Title
c20xe, c20let nova parts Description

C20XE
C20XE weber green injectors IW-050 190cc's @ 3 bar 16-OHMS £80 Postage free.........£50 posted????
C20XE AFM motronic 2.8 (coil pack engine) £SOLD
C20XE oil cooler and pipes £25 posted
C20XE SFI air box with rubber ring that fits to AFM £18 posted
C20XE induction pipe with air temp sensor - late coil pack engine £13 posted
C20XE inlet manifolds, exhaust manifolds, looms, AFM's, ecu's, dizzy's, cam covers etc. (ask for what you need)

C20LET
C20LET/C20XE alloy sump £SOLD
C20LET kkk turbine elbow and bolts (£25 posted) metal bit that the downpipe fits too.
C20LET AFM £SOLD
C20LET TB with throttle switch £25 posted
C20LET KKK turbo - needs a recon £50 Posted.

C25XE
C25XE Calibra V6 stainless steel de-cat pipe £25 posted

X25XE
X25XE injectors 1 full set £20 posted
X25XE front cast manifold £SOLD
X25XE front knock sensor GM £15 posted
X25XE cam sensor GM £15 posted
X25XE coil pack £20posted
X25XE Inlet lower divider £25 posted (larger than c25xe)

X30XE

Z32SE
Z32SE bare block £40
Z32SE crank sensor £15 posted.
Z32SE lower inlet dividers. £25 posted only one left

X20XEV parts;
X20XEV Head without cams £38 posted
X20XEV GM crank sensor £15 posted
X20XEV copy crank sensor only 2 month old £20 posted NOW £15 posted
X20XEV coil pack £25 posted (due to weight) NOW ONLY £18 posted to sell (good for c20let on aftermarket management)

Gearbox
F28 Electronic box £280 - Mint condition Sold
F28 cable speedo £300 - X2 both mint conditionSold
F20 gear set £Sold
F15 box £35

Calibra
Calibra v6 front and rear calipers, nearly new green stuff pads in front, brand new green stuff pads for rear (still in box) £90 £85
Calibra leather door cards £10 the pair (small rip in 1)
Calibra f28 gear linkage and bracket £Sold
Calibra f28 front box mount £Sold
Calibra f28 rear box bracket and rubber £20

Nova
Nova/Corsa/Tigra internal MPI pump, will go into nova SPI tank £40 Posted. NOW £25 posted to sell
Nova GTE, GSI, TD anti roll bar in blue £15 + postage

Astra MK3
set of 4 alloy wheels with 195/55/15 tyres, 6 spokes £120

Slim line fan £25 + p&p

V6 lower divider's for c25xe upgrade, i have a few £20 each
http://img.photobucket.com/albums/v84/nova-turbo/General%20pics/x30xedivider.jpg

[david dixon]

up

[MattBrown]

What colours the drivers door pal?

I gether its mint?

[david dixon]

its opel kiwi green, yeah totally mint mate

david

[MattBrown]

Ffs!

Your a Cnut!

Wuu2 Sunday fella?

[Rob]

Ffs!

Your a Cnut!

Wuu2 Sunday fella?



has somebody been drinking tonight lol

[MattBrown]

No rob, why? Lol

[Rob]

just sounds like youve been on the pop lol

[david dixon]

i think i'm out sunday mate, what do you need?

david.

[david dixon]

more parts just added to the list

david

[david dixon]

3" nova system sold
some parts reduced in price

david

[srs1]

what size are the slicks?

[david dixon]

they are 205/50/15's mate

david

[david dixon]

5 x z32se pistons and rods (87.5mm - 3.2L) SOLD
1x 3.2 lower divider left (largest)

[Tony M]

Pm'd

[david dixon]

replied.
up

[david dixon]

http://img.photobucket.com/albums/v84/nova-turbo/Colway205-50-15.jpg

[Sloth]

do you have the cambelt end engine mount off the z32?

[david dixon]

i think the cambelt was about about worn out mate, which mount is it you want?

David

[Sloth]

the one thats at the cambelt end of the motor, it bolts to the cambelt tensioner and the chaasis leg on the vectra iirc.

[david dixon]

i think i have mate but i'll have to check

david

[Sloth]

did you have a look mate?

[david dixon]

not yet mate sorry, i will do though

david

[david dixon]

up

[david dixon]

up

[david dixon]

up

[david dixon]

up

[david dixon]

up

[david dixon]

up

[david dixon]

up

[david dixon]

up

[david dixon]

up

[david dixon]

up

[david dixon]

bump

[david dixon]

up

[david dixon]

up

[david dixon]

ttt

[david dixon]

updated

[david dixon]

ttt

[Sloth]

did you find that mount fella?

[david dixon]

oh yeah sorry mate i think it must have gone!

David.

[david dixon]

bump

[Fow16v]

gte wrap around spoiler, how much posted please

[david dixon]

probably around £30 mate (postage depending!)

David.

[david dixon]

ttt

[david dixon]

up

[david dixon]

up

[Cle]

C20XE 0.5mm oversized pistons and rings £40

Got a pic of these ? Also would block need to be bored out 0.5mm for them to fit aye ?

[MattBrown]

Got a pic of these ? Also would block need to be bored out 0.5mm for them to fit aye ?

Yes, or a big hammer:thumb:

[david dixon]

i'll sort a pic but yes they would mate

david.

[david dixon]

ttt

[david dixon]

up

[david dixon]

up

[david dixon]

updated, more v6 parts added = a c25xe engine complete with box and shafts etc

[david dixon]

up

[david dixon]

up

[david dixon]

ttt

[david dixon]

ttt

[Shaun]

what condition and tyre size on cally wheels?

also do you do 5 stud front hubs?

pm me

[david dixon]

hello,

The tyre size is 205/50/16 i think, i think 2 are good and 2 are low
i do not do 5 stud hubs just yet

David.

[Shaun]

ok mate set of 4 or 5?

whats best price delivered

[david dixon]

set of 4 mate

£125 posted!

Cheers David

[Danny s-p]

hi dave can you put the gte spoiler to the side for me and all pop over this week end and give you the ££££££ for it

[david dixon]

no bother mate

[david dixon]

Good condtion to most these days, come with 3 legal tyres
just need a wash £125 posted

http://img.photobucket.com/albums/v84/nova-turbo/breaking%20being%20stripped/calibra%20v6/turbofanblades2.jpg

http://img.photobucket.com/albums/v84/nova-turbo/breaking%20being%20stripped/calibra%20v6/turbofanblades.jpg

http://img.photobucket.com/albums/v84/nova-turbo/breaking%20being%20stripped/calibra%20v6/turbofanblades4.jpg

http://img.photobucket.com/albums/v84/nova-turbo/breaking%20being%20stripped/calibra%20v6/turbofanblades3.jpg

[david dixon]

ttt

[david dixon]

up

[david dixon]

updated

[david dixon]

C20LET Mahle forged pistons with rods and ARP's rod bolts, priced to sell £115 posted

David.

[david dixon]

updated and new parts added

David

[david dixon]

update, full v6 brake setup including ebc greenstuff pads front and rear.
3ltr v6 lower dividers.

David.

[david dixon]

ttt

[scorge01]

have you still got the header tank if so you going to pvs? would take it then if you are?

[david dixon]

yes do mate and will be going to pvs so taking it is no problem.
send me your number and i'll contact you when i'm there.

David.

[david dixon]

up

[david dixon]

up

[david dixon]

ttt

[david dixon]

up

[david dixon]

up

[david dixon]

updated, few sold and a couple added

David

[david dixon]

items updated.

David.

[david dixon]

up

[david dixon]

lots more parts added

[david dixon]

up

[chrisnovaturbo]

pm'd

[Angus Closier]

Any pictures of the c20xe pistons yet??

[david dixon]

no mate but i will get round to taking some

David.

[david dixon]

ttt

[david dixon]

ttt

[david dixon]

up

[david dixon]

ttt

[david dixon]

ttt

[david dixon]

up

[david dixon]

up

[david dixon]

up

[david dixon]

up

[flatout618]

Dont suppose you have a 20xe single V bottom end pulley you want to sell ?

[david dixon]

i did have one somewhere, i will look for you mate

David.

[david dixon]

ttt

[BenCNova]

quite interested in the drivers door, will you pm me some pictures please?

[david dixon]

sorry mate i'll have to remove it, its been damaged

David.

[david dixon]

up

[david dixon]

up

[david dixon]

up

[david dixon]

bttt

[david dixon]

decent offers on all parts, need them gone!

David.

[david dixon]

lots of good c20let parts added

[Danb1987]

Pm'd

[david dixon]

3" downpipe sold.

David.

[david dixon]

c20let tuning parts going fast, be quick

David.

[david dixon]

ttt

[david dixon]

up

[david dixon]

ttt

[david dixon]

to the top

[david dixon]

up

[david dixon]

up

[david dixon]

back to the top

[david dixon]

some prices reduced, more parts added.

David.

[david dixon]

All prices reduced.... i need a clearout.

David.

[david dixon]

up

[david dixon]

c20let ecu £100 + p&p

[david dixon]

up

[david dixon]

prices reduced, parts need to be gone.

David.

[david dixon]

bump

[david dixon]

up

[david dixon]

up

[yellow_seh]

up
how much for the anti roll bar posted to rh149je

[david dixon]

It will be a courier mate, so around £12

David.

[david dixon]

up

[david dixon]

a lot more parts added

[david dixon]

back to the top

[david dixon]

ttt

[david dixon]

back to the top

[david dixon]

back to the top

[david dixon]

check the listed parts, loads of parts for sale.

David.

[david dixon]

ttt

[david dixon]

ttt

[david dixon]

updated list

[david dixon]

updated

[jaybo180]

hi m8 hav u got a dizzy c20xe loom? if so how much? cheerz

[david dixon]

Hello mate,

I will check, i think i have but not 100% sure on that.

David.

[david dixon]

up

[david dixon]

up.

[david dixon]

ttt

[david dixon]

Back to the top

[david dixon]

back to the top

[chug1106]

pm'd about pump

[david dixon]

empty your inbox mate.

David.

[chug1106]

done mate,cheers

[chug1106]

received pump today cheers mate.

do you have a 20xe timing belt cover?if so how much?

[david dixon]

I will have mate i will just have to rake it out.
i'm guessing its early belt type?

David.

[chug1106]

yeah pretty sure its the earlier one,picking up the car today,so will let you know,its for a mate,but i will just pay you etc

[david dixon]

No problem mate

[chug1106]

yeah mate its the earlier one,so if you could dig one out that would be great

[david dixon]

ttt

[R1Adam]

alrite mate have you got a complete inlet manifold for c20xe. aslo a dizzy early type wiring loom with ecu thanks

[david dixon]

Hello mate, not sure about the complete inlet manifold but i'm sure i have most bits including a loom and ecu

David.

[nova man dan]

any luck with the v6 down pipe bruv

[Mazz]

You related to him?

[david dixon]

any luck with the v6 down pipe bruv

Sorry mate, i will sort that for you.

David.

[david dixon]

up

[Hobbit]

Nova V6 front mount (home made mount) £30 posted.


Still got this?

[david dixon]

I think so mate, fairly sure of it.

David.

[Hobbit]

Dig it out and I'll paypal some money over

[david dixon]

will do but dont expect it to be anything special, its a bit of a monster munch but it does the job! i'll mail you soon mate

David.

[david dixon]

updated