View Full Version : quick 1
how do you get a mk1 rear bumper off ive undone the to 13mm bolts and it wont budge help
give it a clout on the sides. there are no other bolts
brainsnova
11-02-10, 05:47 PM
the sides are on sliders so it will just pull straight off but you can push the corners as its probs clogged with rubbish.
Guderian
11-02-10, 05:47 PM
slides rearwards i think after the 13mm nuts removed.
the sides are on sliders so it will just pull straight off but you can push the corners as its probs clogged with rubbish.proberly that as its never been off
You may end up takeing the two 10mm bolts out either side of the inner rear arch if it dont budge.
You may end up takeing the two 10mm bolts out either side of the inner rear arch if it dont budge.
Id do that tbh, because the sliders always snap off the sides of the bumpers when you try and slide it off the holders.....
brainsnova
11-02-10, 08:03 PM
do you not need to take the bumper off to get to the bolts of the sliders iirc
I thought they bolt on from the inside of the arch?
xe_nova9
11-02-10, 08:13 PM
Nope, the bumper has to slide off.
The slider bracket attatched to the car is riveted on iirc.
Hit and hope lol
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.