Scuttle Cover [Archive] - Performance Nova Group

Nova_Spider

29-01-10, 03:51 PM

As above......Please PM me.

Cheers
Rob

Nova_Spider

31-01-10, 10:24 PM

up....

offplot

31-01-10, 11:00 PM

If you mean the plastic cover that goes over the heater motor then i have a spare here
PM me if interested

Nova_Spider

04-02-10, 11:22 AM

Thanks, its a complete cover i'm after, preferably in carbon fiber lol.

Nova_Spider

16-02-10, 09:54 AM

up...incase anyone has one! lol

MattBrown

16-02-10, 10:43 AM

Get onto Andy_017, or something like that fella, He has one, Im sure he would let you copy it:thumb:

Edd

16-02-10, 02:13 PM

Get onto Andy_017, or something like that fella, He has one, Im sure he would let you copy it:thumb:

Rickardo made it iirc, i asked about one, got told its a d.i.y job as one made for another nova wont fit:confused:

Nova_Spider

25-02-10, 10:31 AM

I've PM'd him, hopefully he can help!

Rickardo

25-02-10, 05:16 PM

Pm replied too.

It is a diy job, it's a piece of pee to do..

All you need is a cardboard template and some 1.5mm alloy sheet.

Cut the alloy sheet to fit.

Ebay for the edging strip.

Try it with the strip added.

Trim to suit, it will probably catch where the hinges are.

Take strip off,

Powdercoat

Fit strip.

Bobs your uncle. :thumb:

Tools for the job..

Jigsaw. black and decker workmate, some tape and a massive set of ear defenders.

Jakey

25-02-10, 08:50 PM

Pm replied too.

It is a diy job, it's a piece of pee to do..

All you need is a cardboard template and some 1.5mm alloy sheet.

Cut the alloy sheet to fit.

Ebay for the edging strip.

Try it with the strip added.

Trim to suit, it will probably catch where the hinges are.

Take strip off,

Powdercoat

Fit strip.

Bobs your uncle. :thumb:

Tools for the job..

Jigsaw. black and decker workmate, some tape and a massive set of ear defenders.

Any pictures of it?

Rickardo

25-02-10, 09:13 PM

Look at Andy_017 build thread.. There are some pictures on there.

Benn

25-02-10, 09:42 PM

I made mine, made a cardboard template then copied it over to plastic.

Lee H

26-02-10, 07:29 AM

Any pictures of it?

Not the best picture but you get the idea.

http://farm3.static.flickr.com/2433/3997903357_dca3a7b379.jpg

Nova_Spider

26-02-10, 03:50 PM

Thanks for the replies! I just thought it would be easier to buy or copy one, just me being lazy! lol

Graeme

26-02-10, 05:03 PM

Your welcome to you mine as a template if you want Rob

Benn

26-02-10, 08:06 PM

I can make a template, i have a fiber glass one too, but its a bit small in places due to the guy that cut it..