View Full Version : cluch stiff
vauxluva
28-01-10, 08:37 PM
:thumb: It is not hard to push down but it is a long time on coming bk up any ideas maybee cable ?? sorry if im getting anoying also should it have solid disks?? im sure my j reg sr had vented cheers!?:confused: the guy was reconing it needed bleeding up im thinking they may be the wrong disks. Cheers its on a g?
Welsh Dan
28-01-10, 08:43 PM
A G reg non-GTE will have solid discs.
Your clutch cable is sticking. Lubing it will help but its probably rusted through like most of them do.
vauxluva
28-01-10, 08:48 PM
solid ?!!!?!? your are kiding will vented go straight on ?
Welsh Dan
28-01-10, 08:51 PM
You'll have to swap the calipers aswell to fit vented discs.
vauxluva
28-01-10, 09:52 PM
the calipers are masive compared to the 12 items i have normaly had how can i tell?,The car is 50 50 mk2 and mk1 it a hybrid lol
Welsh Dan
28-01-10, 10:49 PM
http://www.xen0phobiak.f2s.com/novaload/bleednipple.jpg
http://www.xen0phobiak.f2s.com/novaload/projectlog/006brakes.jpg
Vented MK2 items look somewhat like that, but a touch smaller.
daverobson
29-01-10, 12:16 AM
my clutch cable was very 'slow' to come back up, then one day it snapped lol, for about a tenner i put a new one on, and made it so much better.
vauxluva
29-01-10, 08:11 AM
cheers for the input......it looks like the same caliper......the last owner was a numty put side skirts on of god nows wat? They only be described as a pair of wings the came out further than the wheels...........some chaps? any way think ill go for the cluch cable cheers.
Guderian
29-01-10, 08:42 AM
Also check the earthing strap is in place.
If you have a bad earth what can happen with cables is they start acting as the earth for the starter motor...and the cable melts itself a little channel into the plastic liner. Seen it happen!
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.