PDA

View Full Version : nova 1.2 ignition module heating up



boydp89
27-01-10, 03:59 PM
i have a nova 1.2 1993 the igniton module heats up beond limits and then it blows up anyone had these faults before

Guderian
27-01-10, 05:08 PM
Description/location of the module please just so we know we are talking about the same thing?

boydp89
28-01-10, 10:32 AM
small unit mounted under the coil pack with a four pin plug connected to it

Guderian
28-01-10, 01:31 PM
ah yes found it.

Those little black modules get hot in use and are sealed to the thick aluminium block by heat sink compound. This is available from Maplins or other electrical shops. My first guess would be make sure the module is making good thermal contact with the aluminium, and resealing it as necessary with the heat sink goo.

Make sure those 4 little pins aren't corroded as well.

boydp89
29-01-10, 10:44 AM
Description/location of the module please just so we know we are talking about the same thing?

small unit under the coil pack it has a four pin socket going into it at ps wheel arch

Guderian
29-01-10, 05:22 PM
Thanks, found it on my own car. I was used to seeing the module on full display (a la Mk2 Cav) not hidden away.

Small cars, eh, what can you do

The only other obvious cause i can think of is component failure elsewhere in the low tension system having a knock on effect, hope he gets it sorted