Exhausts for a loon.

[comptoncj]

What systems do people use on their loons? Is the loon middle section the same as a hatch? What backboxes look good on a loon, any pics??

Cheers
Chris

[Adam]

I THINK everything is the same, just the tip on the backbox is extended by about 2foot

[comptoncj]

I THINK everything is the same, just the tip on the backbox is extended by about 2foot

Oh right, hmmm well ive got a gte stainless system but obviously it would be 2 foot under the boot somewhere when fitted lol any ideas?

[Adam]

Extend the tailpipe....

[comptoncj]

Think thats the only option isn't it, hope it wont look silly though lol

[Adam]

It shouldnt do as it'll be under the car....

[Rob]

i just chopped the tail pipe off welded in a bit of pipe to the desired length then welded the tailpipe back on,job done :thumb:

[Jack]

Saloon system is the same as a hatch, bar the tailpipe. There's no "off the shelf" rear box (unless you're looking for OEM spec one of course).

You can fit a hatch rear box but it will be noisy inside the car, as the sound reverberates up into the boot and back into the cabin.

You'll need to extend the tailpipe by about 12" (depending on the length of the original pipe) to put it in the correct position.

[comptoncj]

Ok Cheers I'l look into it at some point :)

[Rysee]

Or do this :)

http://i136.photobucket.com/albums/q161/neocapture/ClassicCarShowNEC/ncCCweb188.jpg

[Annie]

Brand new sportec backbox what was around £70, My bf then modded to fit the saloon by extending the rear pipe by 10"s, Pipe was around £7 from ebay, He then welded & painted it matt black.

http://i165.photobucket.com/albums/u62/Walshy-Sri/SUC52926.jpg

http://i165.photobucket.com/albums/u62/Walshy-Sri/SUC52927.jpg

http://i165.photobucket.com/albums/u62/Walshy-Sri/SUC52928.jpg

[LEWI007]

Looks good but i think it should of been a bit longer so it stuck out a bit

[comptoncj]

I see, that looks good :)

[Mark]

Looks good Annie