removing front seats

[DEE'S NOVA]

many bolts hold the seats down front of the seat and back?

[Lukenovagsi]

its easy as pie this task is.At the bottom of the sub frame you will find part of the carbit that lifts up down there are 2 bolts take them out and brackets which old the seats in place. Then at the back of the rollers you will find a clip that needs a pair of pilers to get out then the seats slide off the rollers towards the back all front they side. Look in the hannels manual if you get stuck if not give me another email and i'll send you the scanned pictures and infro in.

luke

[DEE'S NOVA]

cheers luke(easy as pie ) me went toke the 2screws out tried toremove it the seen it's stuck at the back somewhere so i tried to losen a nut on the underside of the tray would'nt losen so me :twisted: mother f*ckin ah i give up

but now i have been pointed in the right direction i will resume this mission 2moro :roll:

[MattyWoo]

13mm bolts by the way

[Chris LR]

13mm on the subframe?

[ade]

yeah - on lower spec models theres actually 4 bolts that go over the front part of the frame. Higher spec ones only have 2 bolts and the bracket is welded to the seat (mine was anyway)

Ade

[Will]

yes 13mm on the frame