C20xe airflow meter.

[Damo]

Guys just got my XE running but it wont tick over. If you rev it it will rev but you carnt hopld the revs you have to blip it to keep it running but if i unplug the airflow meter it will rev fine and smooth but has a lumpy tick over. If i then plug it back oin it cuts out am i right in thinking i have a knackerd airflow meter.:tard:

PS sorry for the essay it was the only way i could explain it.

[*Dave*]

try another afm then this will answer your question lol

but more than likely yes by the sound of it.

[Damo]

try another afm then this will answer your question lol

but more than likely yes by the sound of it.

lol yes was gonna do that anyway just posted to see what you guys think thats all bud cheers anyway.

[w88rdy]

i would of said yes mate its knackered, also check hoses to tophat for splits etc

[*Dave*]

check for air leaks , squirt easy-start around the inlet where the tb meets as the gaskets could be leaking.

[Damo]

Hoses are fine to the tophat wardy as there all new ones just looked at airflow meter now and the filament that goes to the points inside
is non excistent lol so thinking this may be the problem.

[w88rdy]

could be mate lol