Iain
31-12-09, 05:24 PM
Alloy footrest, ok condition on front, slightly bent on rear where I had to shape it to fit the front arch for a Nova. Sold
Beesting, with wire to mount on rear roof and run to headunit. Sold
x4 mudflaps, came off a Nova, all brackets there but rusty, some cracking around mounts but usable. Binned
New inner CV joint and boot, to suit all smallblock Novas, part of a "recon" shaft I bought, only done less than 100 miles.
http://iainel.co.uk/images/forums/ForSale6/Shaft.JPG
Pillar trims £2
http://iainel.co.uk/images/forums/Dash2.JPG
1.6 injection rail Sold
1.6 inlet manifold (bolt sheared for alternator bracket but could be drilled & tapped Sold
Almost new K&N to suit 1.6 airbox
http://www.iainel.co.uk/images/forums/ForSale4/KNPanel1.JPG
Bosch loom and ECU, missing the odd plug (RON?) but worked fine on my E16SE. Crimped terminals for fitting to a 1.2 (or similar) loom
http://iainel.co.uk/images/forums/ForSale4/Loom1a.JPG
Postage available on all items at buyer's expense, or collection from Nottingham welcome.
Also for sale: AVO Adjustable suspension kit (http://www.pngclub.com/forum/showthread.php?t=132916)
Beesting, with wire to mount on rear roof and run to headunit. Sold
x4 mudflaps, came off a Nova, all brackets there but rusty, some cracking around mounts but usable. Binned
New inner CV joint and boot, to suit all smallblock Novas, part of a "recon" shaft I bought, only done less than 100 miles.
http://iainel.co.uk/images/forums/ForSale6/Shaft.JPG
Pillar trims £2
http://iainel.co.uk/images/forums/Dash2.JPG
1.6 injection rail Sold
1.6 inlet manifold (bolt sheared for alternator bracket but could be drilled & tapped Sold
Almost new K&N to suit 1.6 airbox
http://www.iainel.co.uk/images/forums/ForSale4/KNPanel1.JPG
Bosch loom and ECU, missing the odd plug (RON?) but worked fine on my E16SE. Crimped terminals for fitting to a 1.2 (or similar) loom
http://iainel.co.uk/images/forums/ForSale4/Loom1a.JPG
Postage available on all items at buyer's expense, or collection from Nottingham welcome.
Also for sale: AVO Adjustable suspension kit (http://www.pngclub.com/forum/showthread.php?t=132916)