F15 cluster fit in f10 casing?

[John]

as per title, will the f15 cluster fit the f10 casing ok? I'm guessing so?

[belmonty_daryl]

yes it will,

[Plug]

sorry to highjack but what gearbox is on the 1l? 4speed? would i be able to put a 5speed cluster and selector on it?

[Stuart]

'should' do... some of the later F15's might have different bearings as thye moved to the F16/20 style of single piece FD pinon+output shaft

[belmonty_daryl]

sorry to highjack but what gearbox is on the 1l? 4speed? would i be able to put a 5speed cluster and selector on it?

i would say 4 speed but i know you can get a 5speed 1.0 not that i have seen one though. im pretty sure a 5 speed cluster would fit in but to be honest its just as easy to just change the box.

[mowgli]

sorry to highjack but what gearbox is on the 1l? 4speed? would i be able to put a 5speed cluster and selector on it?


as long as you swap the final drive gear & make sure you put a 5 speed shifter box on instead of the original 4 speed one, then it will be way easier to swap the innards over. just follow the haynes info & you'll be fine. new gasket kits are all over ebay & use 80w-90 gear oil.

[Plug]

cheers for that information i really need a 5th for motorways lol

[mowgli]

no, what you need to do is tell us what the final drive number is off the side of the gearbox..... yours might be very low.......

[Plug]

ill pop out tomorrow when its not raining and have a look

[mowgli]

ok, the 1.0 might struggle to pull a decent top gear if the diff is too high...
my gte has a f13wr box with a 3.74 diff (basically a diesel box) and it doesn't like top unless you are doing about 70, my 4th gear is the same as the original top gear