View Full Version : Rear seam welded
puss puss
27-12-09, 01:54 AM
Gonna rip the rear seats + carpet out soon am i right in thinking some of you seam weld the rear as well?
Show me your pictures so i can get an idea
thanks in advance :thumb:
pikey1986
27-12-09, 07:32 AM
just weld in a strut brace, check the articles section for a 'how to'
puss puss, a seam welded shell only really works properly with a full cage.. as it is all about shell stiffness. if you have done the front, then logic says to keep going thru to the rear or you will have a shell that is stiff at one end & bendy at the other, which means that something has got to give eventually.
in my humble opinion, a rear brace is as much use as a cadbury's fireguard, unless it is also fitted as part of a full cage setup with coilovers.. other will disagree, but all rear damper forces are vertical so tying the two damper tops together is a waste of metal
well put Mowgli
Just a few of mine i sold last month.
http://img.photobucket.com/albums/v617/chunny01/JDL%20Project/jdlnova095.jpg
http://img.photobucket.com/albums/v617/chunny01/JDL%20Project/jdlnova088.jpg
http://img.photobucket.com/albums/v617/chunny01/JDL%20Project/jdlnova085.jpg
http://img.photobucket.com/albums/v617/chunny01/JDL%20Project/jdlnova008.jpg
May help a bit mate.
BRoadGhost
27-12-09, 08:34 AM
Just stich weld the whole car
George g
27-12-09, 10:26 AM
Ernie,
What's with the flat floorpan in the boot? Does that actually give you any advantage? (sorry to hijack the thread a little)
Ernie,
What's with the flat floorpan in the boot? Does that actually give you any advantage? (sorry to hijack the thread a little)
http://i293.photobucket.com/albums/mm71/richardmee/17052009045.jpg
This is what I did with mine:
http://iainel.co.uk/images/forums/NovaWIP2/151.JPG
http://iainel.co.uk/images/forums/NovaWIP2/152.JPG
http://iainel.co.uk/images/forums/NovaWIP2/125.JPG
http://iainel.co.uk/images/forums/NovaWIP2/132.JPG
And you can see where I did along the floor and underneath:
http://iainel.co.uk/images/forums/NovaWIP2/141.JPG
George g
27-12-09, 02:34 PM
http://i293.photobucket.com/albums/mm71/richardmee/17052009045.jpg
:thumb:
That makes more sence!
andy_017
27-12-09, 04:18 PM
My mk1 is the same as Iainel's at the rear turrets, I only stitched it here and didnt carry on doing all the floor though, i did the rear turrets because i'm going to be running rear coilovers where the spring is integral to the shock so no need for a spring on the beam! Thus moer pressure going through the rear turret area!
puss puss
27-12-09, 09:13 PM
thanks guys all the replys really helped me out
Hopefully gonna start on stripping the rear 2morrow or the day after and start seam welding the rear up a bit, Metal shop is shut for a week or 2 so dunno if ill be able to get any sheet metal for the rest of the car for a little while lol o well...
:thumb:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.