View Full Version : K plate GSi - Digi Dash Install Help - Pic provided
morpheus
25-03-03, 04:19 PM
I have a K plate GSi and I have been told I can use the gear box transducer on it to go to my 8v digi dash, is this true???
My engine bay is below if that helps????
http://www.theeuropeanoperation.com/dan.jpg
Ste_Nova
25-03-03, 04:43 PM
nice a v rare dispac gsi
IDENT AA 6 PULSES
Ste_Nova
25-03-03, 04:44 PM
hang on it's not a black plated K.... is that the orignal engine?
morpheus
25-03-03, 04:57 PM
Yes its all original, whats dispac???? And can you help with the digi dash problem?
Aragorn
25-03-03, 05:18 PM
if u look on the gearbox the sender should already be there for the ECU with the speedo wire screwed into the top of it
what u need to do is splice into the SIGNAL wire (blue with red stripe iirc) and run this to the dash
do NOT break the original connection to the ECU however as this will cause the management light to come on and the ECU will start binting at you
morpheus
25-03-03, 05:23 PM
So is it only the blue wire that has to go to the digi dash?
Aragorn
25-03-03, 06:03 PM
think thats the color
should be brown, prolly black and the signal wire
it tells u in the digidash guides what color it is
just dont follow the guide about fitting the sender, just splice into the existing wire and feed it to the dash nowt else
what i did was connect the sender, the 12v feeds and ground to the dash
then took it out for a drive (still with the original clocks inplace and the digiclock on the passenger seat) it worked so i followed the rest of the guide normally :)
jatinder
25-03-03, 06:24 PM
er i know this sounds stupid that looks exactly like my engine and ive got a sri is that i havent got a 1.4 in it at all but 1.6 ?
Ben (lurk75)
25-03-03, 06:32 PM
Most the injecton engines look the same, except they have different size chambers etc.
jatinder
25-03-03, 06:47 PM
no but that looks exactly the same so is it a 1.6 then?
a multi point injection 1.4 would look the exact same.
But if ya still don't believe us check the stamp on the head(front, right, bottom)
jatinder
25-03-03, 07:25 PM
ok ill check in the morning wots it supposed to say 14nz or sumthing
Aragorn
25-03-03, 08:44 PM
the later GSI's (C16SE rather than the more common E16SE) used the same multec injection as the SRi - IE no AFM on the inlet just a pipe streight to the filter
wot ever engine hes got he needs skoosh in his washer bottle!
tut tut
:lol:
mikeoxford
26-03-03, 12:22 AM
So is it only the blue wire that has to go to the digi dash?
blue with a red tracer/stripe
morpheus
26-03-03, 09:23 AM
WHATS SKOOSH???????
morpheus
26-03-03, 10:36 AM
Ste said my GSi was a dispac, what is dispac??????
And does anyone know where I can fins sh!t hot installation guide for the digi dash???
Someone told me that if you use the blue with a red tracer/stripe from the original transducer the revs and the speed will be out is this true??????
Please help i am fitting it the weekend!!!!!
mikeoxford
26-03-03, 10:10 PM
WHATS SKOOSH???????
think he means washer bottle fluid
and dont post tiwce in a row, you get bo!!ocked at like i do
Aragorn
26-03-03, 10:33 PM
as i pointed out in the other thread the 8v digidash and the multec ECU both use the same distance frequency transmitter (gearbox sender)
so it will work fine
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.