PDA

View Full Version : gear linkage



novah108gly
12-12-09, 05:14 PM
been out in the nova today and all was going well until i stopped of at my local motor factors only to return to my car wich was fine when i parked up to find i had no gears? i found that the linkage had popped out how can i stop this happening again?

Rich
12-12-09, 05:15 PM
New linkage, or make/buy a rosejointed one

nova-taken
12-12-09, 05:19 PM
depends what you mean, has the gear lever popped out of the gearbox linkage?

or has your linkage fallen apart like so many nova ones do?

Ernie
12-12-09, 05:38 PM
if its the bit with the white bushe's that is held in by a little sprung clip refit the clip and put a cable tie round to hold the pins of the clip in.worked fine on mine.

novah108gly
12-12-09, 05:55 PM
if its the bit with the white bushe's that is held in by a little sprung clip refit the clip and put a cable tie round to hold the pins of the clip in.worked fine on mine.

its a ball that pushes into a socket?

auzzy-b
12-12-09, 06:26 PM
Best off with a rose jointed one, they'll never fail..
Or buy a new linkage/socket if there still available?

nova-taken
12-12-09, 07:44 PM
listen to aussy-b, rose jointed linkage ftw