C20XE Throttle Bodied Engine

[Cally]

Title

C20XE Throttle Bodied Engine

Description

I am going to break my track car project as I fear its just going to sit in my garage doing nothing. So first off I am sticking my engine up forsale to see if there is any interest with more parts to follow.

Spec -
C20XE
Jenvy DTH Throtte Bodies
SBT TP225 Cams
Vernier Pulleys
Polished and ported head
Bronze valve guides
Double valve springs
Forged pistons with 1.5mm pockets
Emerald 3D ECU
Rebuilt bottom end with new seals and gaskets
QED Oil pump with hardened steel internals
Lightened and balanced flywheel
Polished Crank
ARP rod bolts
ARP Head studs

Details on the bottom end:

Early 20XE Block and Internals.
ARP Con-Rod Bolts.
Polished Crank With New Main and Big End Bearings.
XE Pistons (Mahle) Machined With + 1.5mm Deeper
Valve Pockets, Complete With New Piston Rings.
Fully Rebuilt Bottom End With New Gaskets and Seals.
Up-rated Oil Pump with QED Hardened Steel Internals.
High Pressure Nylon Oil Relief Valve.
New Water Pump.
New Idler and Tensioner Bearings.
Z20LET Head Gasket.

Also an F20 gearbox and all the silicone hoses come attached to the engine.

PM for pictures.

Looking for £1950

[novaxe235]

How much power/torque ?.

[Cally]

I'll need to look it out to get the torque but it made 192bhp, limiter is low though so could be mapped higher for better figures.

[Cally]

Found the first rr read out for it, will need to make some more posts on here before I can post them. Should have posted more and not just creeped about in the background lol

[Shaun]

15 posts it is mate

u can post pics now :)

[Cally]

http://corsasport.co.uk/carimages/3031/dscf0016.jpg

http://corsasport.co.uk/carimages/3031/dscf0015.jpg

http://corsasport.co.uk/carimages/3031/RRGraph.JPG

Was mapped with a rubbish manifold and low rev limit so with a decent manifold / exhaust and raised limit it will make more.

[Adam]

Any chance of you breaking it? (bodies and management)

[Cally]

Nah too much hassle, its on a pallet ready to go just now. Just wanting to see if I can get the engine sold first before I start breaking the rest of the car.

[Cally]

Back up again.

[ant_tay]

i would be interested in the engine without the Jenvy DTH Throtte Bodies, Emerald 3D ECU and the f20

[Cally]

I don't really want to break it tbh.

[ant_tay]

i can understand that but you do now have someone interested in in the the engine and someone else interested in the stuff i dont want so erither way you get rid of it all

[Cally]

Well if you want to speak to the guy and come to an arrangement on a split of the payment, then I would strip it for you. But thats the best I can offer.

[Cally]

Up for the weekend.