PDA

View Full Version : Nova GSI parts performance



benny f gsi,n it
30-11-09, 07:41 PM
Most of these parts have only been on the car about 2 months before i swaped to twin carbs so like brand new. please pm me for pics which will be sent via email. and postage prices are a rough estimate to be confirmed when a buyer is found if not wanting to collect from ipswich suffolk.

Air flow metering unit for a E16SE complete with pipe and brand new k&n, pipe is starting to crack but no air leaks, afm has been painted black with polished raised bits. £ 35 p&p £7

Inlet manifold for E16SE this has been ported and polished and then painted black along with a enlarged throttle body and butterflycut flap all very nicly done by headtune cost a small fortune. Also the egv valve has been blanked off. £40 p&p £15

A set of injectors for E16SE all worked fine was a spare set. £10 p&p £5

Another set of injectors for E16SE but these ones have been sent away to a bosch specalist and ultrasonicaly cleaned and tested got recipt to prove £70.50. Included on a polished fuel rail im after £4o give a real feel back to performance p&p £5

A set of adjustable solid lifters to suit E16SE cylinder head may fit many other vauxhall 8vs came out of a harry hockley head look very good condition no wear at all. £170 p&p £10

Brand new set of powerflex poly bushes -
gsi anti roll bar bushes 4 of £10 p&p £4
front wishbone bushes with metal sleve £10 p&p £4 SOLD

c20xe idle control valve in good working order £15 p&p £4

8v rocker cover hand polished to a very good standard and then the inlay of 1.6 injection painted black. SOLD

Nova gsi throttle cable with the ball and clip end £7 p&p £3

benny f gsi,n it
01-12-09, 09:58 AM
up

benny f gsi,n it
02-12-09, 10:44 AM
prices open to offers near guide prices

novalovingned
02-12-09, 11:32 AM
Pics of anti roll bar bushes please mate?

benny f gsi,n it
02-12-09, 04:09 PM
pmd

benny f gsi,n it
04-12-09, 03:11 PM
up

Tommy_nova
04-12-09, 04:47 PM
Have you posted that rocker cover yet ?

Tommy

benny f gsi,n it
08-12-09, 09:00 PM
sorted and posted, bump to the top

stylesy451
08-12-09, 09:27 PM
if i had the ported and polished manifold would i need my head ported and polished?

benny f gsi,n it
08-12-09, 11:16 PM
nar but would best to get the head atleast matched to the manifold, release some bhp from the rough standard manifold

benny f gsi,n it
10-12-09, 03:43 PM
up