Corsa Gsi

[Rickardo]

I'm going to start a thread on the corsa, all i have to do is remember to take the photos. I always forget.

Came home monday night and i had a swimming pool in the back of the car, so i ripped out all the carpet, by torchlight. soundproofing was like a sponge, out it came.

Spent another 2 nights taking everything out i won't need again.

Today's job's.

Heat gun off all the sticky horrible stuff, i have a heatgun brand on my hand, got too close.

Cleaned, hoovered and painted.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1021.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1022.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1023.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1024.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1024.jpg

Then Stupot came round to help put some new suspension on. Cheer's Stu. :thumb:

Got some buckets and harnesses to go back in tomorrow, so hopefully i will get some more pic's.

[Graeme]

Corsa sport is that way>>>>>>>

[saloonwoody]

is that brush on hammerite ?

[Graeme]

Only joking mate, I think your starting to love this car, should look good with them Monaco's fitted, how rough is it round yours if you have to leave your steering lock on whilst your working on your car? lol lol lol

[Rickardo]

Only joking mate, I think your starting to love this car, should look good with them Monaco's fitted, how rough is it round yours if you have to leave your steering lock on whilst your working on your car? lol lol lol

lol lol.. I'd like to see them nick it with no seats in it.

It is brush on hammerite smooth.. All the water had turned the floor all brown and sticky.. It's come up a treat.

Seats in tomorrow. :)

[Rickardo]

Only got one pic, it was and still is throwing it down.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1025.jpg

[xe Dan]

you really getting into the bubble nova then good work ric

[Rickyb]

looking well but i much preferd your nova

[Rickardo]

Tbh i preferred the Nova. lol

Cheer's Dan, i have to do something to keep me busy, it's either mess with the car or talk to the wife. :)

[Adam]

Nice motor, i would of had it if you hadnt of bought it.. lol

Is it your daily driver???
How come you decided fit buckets? Id never drive a stripped car for a daily again

[Rickardo]

Adam, it is my daily drive. I have some custom fit ear plugs in the car just in case it's too loud. :eek:

Just trying to decide what else to do to it now.

[stupot89]

any time rick seats look good mate

[Rickardo]

If they cripple me i'll give you a bell. :thumb:

[stupot89]

good man

[Nobby]

looking good pal!

[Rickardo]

Right people, i'm bored of the XE now. I need more power. After having the Let in the Nova the XE is pi$$ poor,I don't want to spend a fortune getting the XE to 200bhp ish.

In the past i have had:

Astra Gte 2.0 8v
Astra Gte 2.0 16v
Nova 2.0 16v Turbo

I fancy a V6 in my Corsa, 200bhp should be easily available with a V6, plus i really fancy the burble of a V6. With the Corsa being seriously stripped it should be entertaining to say the least.

Opinions please, i know a few of you have got V6's in there Novas/Corsas.

What are the pro's and con's? Which V6 is best to use, 2.5 3.0 or a 3.2? I'm guessing it won't want to go round corners, i'm used to that, the Nova didn't like them either.

:thumb:

[andy_017]

V6 sounds like a good plan dude ;)

Cheers for sorting that stuff before!

You really do love the corsa egg don't you!

[Nick J]

I know what your saying regarding the power loss, even the missus streetka biltz's my corsa never mind the nova! As well as the bubble looks Im having the urge to either sell or do something with it too.

Nick.

[Rickardo]

V6 sounds like a good plan dude ;)

Cheers for sorting that stuff before!

You really do love the corsa egg don't you!

No prob's Andy.. See you tomorrow.



Nick, XE's just don't do it for me anymore.. Maybe when i was 19.

I'm missing my extra 100 bhp. :cry:

[Graeme]

Maybe when i was 19.

Was the xe even thought of then? I thought it was Crestas and Ford Pops lol lol lol

[Nick J]

Was the xe even thought of then? I thought it was Crestas and Ford Pops lol lol lol

lol lol lol

[AlexW]

Do it. Most of the V6 corsa stuff is straight out the box. No harder to wire than anything else.

Go on www.ima****inggayandiownacorsaB.com (www.corsasport.co.uk) and search.

[Rickardo]

Was the xe even thought of then? I thought it was Crestas and Ford Pops lol lol lol

when i was 19, an Xe was NEW.. lol

I'm an old man Graeme, you know that. :thumb:

[Graeme]

Just worked it out they were 2 or 3 years old, I bet a filter and an exhaust were still revolutionary back then

[Rickardo]

Just worked it out they were 2 or 3 years old, I bet a filter and an exhaust were still revolutionary back then

I was 19 in 1990, so an xe was only a couple of years old.

My 16v astra had a filter and a zorst, well quick.. lol

[Joe Richardson]

I know what your saying regarding the power loss, even the missus streetka biltz's my corsa never mind the nova! As well as the bubble looks Im having the urge to either sell or do something with it too.

Nick.

get a xe in it Nick :thumb:

[Lee H]

A Corsa needs a LET, XE's just aren't quick at all in them.

[MattBrown]

A Corsa needs a LET, XE's just aren't quick at all in them.


Sell me the engine then:)

Simples, put a saab let thingy in her?

And tbf, when I went out in it when offplot owned it, it seemed pretty fast lollollol

[Sloth]

rick, the corsa v6 is very easy if the corsa has a big block already in it. you can use any size v6, but its best to run the cali/cav manifold setup, and the loom, and it wires the same as the xe. earlier the better as it wont have a chipped key. it wil run a 3.0 or 3.2 on the 2.5 ecu as it "learns" the engine. you need to trim the bulkhead near the servo, and move the rad forward for space. call chris astley, he sells the mounts cheaply. use your current box and use an early xe flat flywheel and clutch. the exhaust is easy but it needs the mani or the down pipe cutting and welding to miss the rack. ill find some usefull links...

sloth

[Sloth]

here you go, this has a few good pics in it..
http://www.migweb.co.uk/forums/projects-restorations/398899-jimbos-v6-tigra-project.html

[Grey]

This is Proberly completely irrelevant but my mate of mine who lives very near to me had a red corsa with a v6 wich had lots of extras in the engine bay it sounded completely wicked as a v6 does lol but he also had some sort of £1000 pound exhaust system wich i think sounded just like a Tvr Tuscan! definetly got some looks but what i will say he had a dyno print out of 216bhp my nova c20xe runs 169bhp (it did back then lol) and we were neck and neck no diffrence what so ever on the roads. he beat me by speed! very awsum though! but then again all engines are different depending on their life.

[Rickardo]

Now all the poo weather has gone i thought i'g treat it to a wash and a few pics.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1067.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1069.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1068.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1070.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1072.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1078.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1077.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1081.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1080.jpg

On the way home the EML came on, turned it off and it went out.:tard:

Can't wait to rip out the Xe and get a 3.0 V6 in it.

[brainsnova]

the teddy finishes it off nicely.

[Graeme]

Looking good Rick, are you attending tomorrow still?

[Rickardo]

Sure am Graeme, i'm riding shotgun with Stupot. :)

[Spudly]

Errr, Rick, why does your corsa appear to have eaten a little blue teddy, and if youre V6'ing it then i take it youre not a fan of going round corners lol

[Rickardo]

The teddy lives in the engine bay, he says its warm in there. Don't forget i had a Turb Nova, that never liked corners either.

The xe is pants.. :cry:

I need more umph...

Plus the burble of a V6 is brill.

[Spudly]

Plus the burble of a V6 is brill.



Youre telling me lol

[Nick J]

V6 noise is great and would be cool. Back of the car is pining for a nice strut brace though ;) lol catch you tommorow fella.

Nick.

[Rickardo]

lol lol. I have got the money in my wallet just in case Nick. :thumb:

[andy_017]

You're teddy eating corsa looks good rick ;)

[Rickardo]

Cheers Andy. :)

Are you and little Pippy still going tomorrow?

[Connor]

reminds me soo much of my mates old valver gsi
looks spot on :thumb:

[andy_017]

Yeah mate me and little pippy attending all being well!

[Rickardo]

Good, can you and pip last that long without falling out? lol

[Rickardo]

Some more pics.

It's no longer a "Redtop".

Its a "Glow in the dark top" now.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1087.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1090.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1092.jpg

A pic of the brace i got off the one and only Nick J.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF1089.jpg

[Southie]

Looking good mate, how many more colours are you going for in your engine bay lol Next Bungle, Rod, Jane and Freddie will pop out to complete the Rainbow lol

[novalicous]

coming along nicly now rick

i think you should spray your spare to match the rest and paint the rear inner archs black aswell :thumb:

[Rickardo]

Looking good mate, how many more colours are you going for in your engine bay lol Next Bungle, Rod, Jane and Freddie will pop out to complete the Rainbow lol

Bungle FTW..lol

At least its a not boring colour. :thumb:

[Southie]

Bungle FTW..lol

At least its a not boring colour. :thumb:
Not a boring colour at all just a tad bright. Gremlins comes to mind lol

When are you sticking a V6 in then?

[Rickardo]

Not a boring colour at all just a tad bright. Gremlins comes to mind lol

When are you sticking a V6 in then?

When i rob Natwest.. Until then it's the Xe. :)

[Rickardo]

Been a busy boy today. After our trip to Scotland, the Egg needed some emergency repairs..

First job was to replace inner and outer CV boots.

Which wouldn't of been too bad, but the CV joint decided it was going to rip itself in half.. All the bearings has fallen out. Maybe thats why it didn't feel too good.

Then decided to put new discs and pads on..

Also put in some Hel braided hoses as well.. Yes they are Pink..

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2015.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2018.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2020.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2023.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2025.jpg


http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2028.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2030.jpg



Painted the calipers, tie bars and wishbones in Matt black..

Jobs to do:

Do rear braided hoses.. Pink again..

Replace rear shoes.

[John]

What make and where from on the discs fella?

[Rickardo]

Discs are Bremtech £26 each. Got them from Brakes International.

Pads are Ferodo £70 :eek:

They better be good for that money.

[Ste L]

nice work rick :thumb:

[Rickardo]

Cheers Ste.. I'm beginning to like the Egg now.

Kicked its head in around Scotland.. 1700 mile in 5 days.. All at warp speed

Only problem was a dodgy lambda, unplugged it and away i went..

I've even changed my mind about the V6..

[Ste L]

lol...

so thought about other tuning, if your not going v6? ie cams and tb's?

[Rickardo]

I keep thinking about 45's.. But with the price of juice, i don't think so..

See what i can do to eek out a bit more power.

[xe Dan]

ive got one of these now rick smoke grey corsa gsi red top yours looks good

[Rickardo]

Bit of an update, changed the 3.0 bar FPR to a standard 2.5.

Found a dodgy earth on the fuel rail. It sorted my EML light out for a couple of weeks, it came on when i accelerated. Not all the time though.

Changed the air filter and connecting pipe to the AFM, now the friggin EML light has started to come on again. It's getting on my tits.

Gonna flash the ECU tomorrow and see.

Lots of parts bought.

Whiteline front & rear ARB.

Powerflex bushes. All round.

Gaz coilovers.

Track rod ends.

Gonna try and do some jobs tomorrow.

Lets hope i remember the sodding camera.

Pics to follow. :thumb:

Rick

[Graeme]

Painted the calipers, tie bars and wishbones in Matt black..

Jobs to do:

Do rear braided hoses.. Pink again..

Replace rear shoes.

Have you been to counselling? I thought you were a gloss kind of man

How apt are those hoses for you... :gay:

[Rickardo]

I wanted the pipes in hammerite black. They didn't have any. I thought, "which colour would Graeme dislike the most". So I went for pink. It matches your makeup. lol

[stupot89]

lol

[Rickardo]

Been busy today.

First of all, a MASSIVE thanks to Stupot for giving me a hand. :thumb:

And a big thanks to Mark @ MCD Vaux for using his ramps.

Sorted out the mystery EML fault, turned out to be the knock sensor.

Fitted front & rear ARB.

New Powerflex bushes, front and rear.

Pics.

Teddy is scared of heights.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2034.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2038.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2040.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2041.jpg


http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2042.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2044.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2046.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2047.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2050.jpg

Stu say's i'm a pervert for having polished shafts..


http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2051.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2054.jpg



Jobs to do shortly, fit Coilovers when they turn up, and i still need to do the rear braided pipes.

:thumb:

[Rickardo]

As some of you know, i had a slight problem on the way home from the NE meet in Scarborough.

Took the box off this morning..

We took it off and found shed loads of metal filings on the inside of it..

Took the clutch off, to find the splined housing, in the center of the clutch had totally eaten itself..

So, it took another 2 hour hunt on a bank holiday to find a clutch.

Just in the middle of putting it back together..

Pics to follow.. :thumb:

[AlexW]

Good progress, What is the handling like with both ARB's?

Shame about the box, was it a f20?

[MattBrown]

As some of you know, i had a slight problem on the way home from the NE meet in Scarborough.

Took the box off this morning..

We took it off and found shed loads of metal filings on the inside of it..

Took the clutch off, to find the splined housing, in the center of the clutch had totally eaten itself..

So, it took another 2 hour hunt on a bank holiday to find a clutch.

Just in the middle of putting it back together..

Pics to follow.. :thumb:

Ahh, so this is why the nw gayys have been ringing me?

Lolage, stupot last night, seemed in a bit of a panic to get onelol

[Rickardo]

The handling is miles better with the ARB's..

I was in a panic for a box last night, it is my daily. So i bought a F20 . We were convinced it was the diff. It was running a F16

Closer inspection revealed it was the clutch like i said earlier.

So we put the F20 instead.. I can abuse it more now.

Pics.

New box before a clean.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2060.jpg

After a clean.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2061.jpg

I changed all CV boots only 3 weeks ago, this was fubared already. Not sure if it happened yesterday or not.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2063.jpg

Rear ARB is stiff. Its sat on 2 axle stands at the front.
http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2065.jpg

For sale.
http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2067.jpg

Whats missing??

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2074.jpg


Knackered clutch, loads of meat on it.. Centre splines bolloxed.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2069.jpg

New clutch.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2071.jpg

Got extremely peed off with it, so only have a finished pic.

Been out in it and it feels miles better with the 20 instead of the 16.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2077.jpg

[Lee H]

That looks like a clutch for a flat type flywheel and on the picture of your car it has a pot type flywheel.

How did you make that work or did you only use the friction plate out of the new kit?

[Rickardo]

Lee, you have eyes like a ****e house rat..

Your correct..

We had to use half the existing stuff. :thumb:

[sulphur]

I really like that corsa. Would look the nuts with those two tone cesaros you had on the nova.

Luv it:thumb:

[Lee H]

I'm just used to seeing that view of my Nova with the gearbox and clutch off so its the first thing I looked at!!

[Rickardo]

Lee, i'm used to looking at your F28 as well..

:thumb:

[Rickardo]

I really like that corsa. Would look the nuts with those two tone cesaros you had on the nova.

Luv it:thumb:

I keep thinking about the wheels, not sure which way to go yet.. I quite like the steelies..

The rust on them gives it "Character" . lol

[MattBrown]

Sell it me rick, nex year, when your bored and I can actually insure it lol

[Rickardo]

I've just spent a small fortune on it.. And it still looks like crap.. ( Thats how i want it)

TBH, nobody would buy it for the money i want..

If i ever think of selling it, i'm gonna strip it.

[John]

Really starting to love the egg gsi, yours is a good example fella!

[MattBrown]

I really do adore smoke gray GSI's

Want to build one, but I want alot of things :(:(

[Rickardo]

I'm spending the money on bits that you can't see.

Brakes.
ARB's
Coilovers
Clutch.. That was a kick in the nuts today i can tell you.
Gearbox.. (At least i have a spare again)

I had a spare box till Andy 017 needed it desperately.. ( Thanks dude :cry:)

Having the Let Nova, i thought it would be wise to have a spare.

I knew something would happen when i sold it.

[Adam]

Nice. Does look quite cool on the steelies!

[Andy]

Glad you got it sorted mate,sh1te luck were that happening on way home.
So does it appear the clutch has gone and took the box down with it or vice versa?

[Lee H]

Clutch.. That was a kick in the nuts today i can tell you.


Especially when you only used the cheap part of it lol

Not as much of a kick in the nuts as my clutch though :cry:

[Rickardo]

Glad you got it sorted mate,sh1te luck were that happening on way home.
So does it appear the clutch has gone and took the box down with it or vice versa?

TBH, i haven't checked the box yet.. It had metal filings inside it, i wanted to put the F20 anyway.. I think the problem was the clutch.. Just glad it happened a mile from home and not in Scarborough.

[Rickardo]

Especially when you only used the cheap part of it lol

Not as much of a kick in the nuts as my clutch though :cry:

I know... I'm beginning to hate gearboxes.. Only done about 10..

[Lee H]

I know... I'm beginning to hate gearboxes.. Only done about 10..

3 of them were my F28 though lol

[Rickardo]

Got the mrs a spare wheel for Roy the Rover.. Decided to paint it..

Then got bored, so painted my steelies as well..

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2079.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2081.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2080.jpg

Soddin n/s inner cv boot has gone again.. Only been on 2 weeks..

Changed it twice in a month.. :cry:

Another job to do...

[Cle]

Steelies FTW :thumb:

[vaughanmc]

Looks not too bad but can't help think it would look nicer on the original alloys ;)

[Rickardo]

Looks not too bad but can't help think it would look nicer on the original alloys ;)

It scrapes it's ar$e now Vaughan.. With 14" on, i'll get it beached on a speed hump..

I'm hoping to lift the front and drop the back when my Gaz coilovers EVENTUALLY turn up.

[vaughanmc]

Low is the way to go I suppose...I'd raise it a bit so it clears and no more lol

Does look cool though cheif

[Rickardo]

Been mincing with the Egg again.. Bought some blingy wheel nuts, and a new Omp steering wheel.



http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2086.jpg


http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2087.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2088.jpg


http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2090.jpg

[stupot89]

still say the wheels would look better baby blue

[Southie]

mmmmm what shiny nuts you have lol

It will look better lowered more I agree, also HOW BIG is the omp logo jeeeesus lol But do like the steering wheel ;)

Do Boret A's go on Corsas okay in a 16" size?

[Nick J]

You not fancy the cav wheels you have up for sale on it fella? I think they'd look pretty good! Hope to catch up and have a chat at the next meet etc. :)

Nick.

[Rickardo]

Nick, i really like the Cdx wheels.. I just can't be bothered changing the tyres.. If i get no buyers i'll probably put them on for Pv.

Coilovers should arrive this week, looking forward to sorting the ride height out. :)

[Joe Richardson]

Im liking the steering wheel,looking good mate :thumb:

[MattBrown]

How much where the studs?

About £1.50 each+vat from vauxhall!

[Rickardo]

Matt, £20 off fleabay. !2 wheel nuts and locking nuts.. Free P&P.

Changed wheels, Nick got me thinking..



http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2100.jpg



http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2110.jpg

Time to sell the steelies i think.

[saloonwoody]

how much for the steelies ?

[dj_wudgey]

looks good matey!! and i love the new steering wheel!!

[Rickardo]

Look what came today at 3pm. :)

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2141.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2142.jpg

This is the old ride height on the back.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2143.jpg

This is the new.

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2144.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2149.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/DSCF2148.jpg

I lifted the front abit, on the Gas shocks, the exhaust used to scrape just abit.

Not too sure if the back is too low yet. I'll drive it and see.

[Spudly]

You will need your headlights realligning fred :p

[Rickardo]

Maybe, i have 100/80 bulbs in as well..

[Spudly]

Ooh hell you will definately need them doing or the feds will be bum raping you for giving them sunburn of the retina lol

[Cle]

I think that would look the bee's knee's with the steelies back on :thumb: :)

[Nick J]

Looks much better for the lower stance Rick! Id have the bonnet painted up body colour and Id say you'd be onto a winner! ;)

Nick.

[Rickardo]

Nick, chalk board bonnet and roof..

Gives the daughter something to do when she is bored. :)

[Nick J]

Nick, chalk board bonnet and roof..

Gives the daughter something to do when she is bored. :)

Fair play mate! lol

Nick.

[Spudly]

I think that would look the bee's knee's with the steelies back on :thumb: :)



Gay!!



Dont say that as it looked gash on the steelies and it took us long enough to make him get rid :p

[Rickardo]

lol @ spud.

I think the Cdx wheels look miles better than the steels.

[stupot89]

:cry: :cry: :cry: :cry: :cry: :cry:

[Rickardo]

Why you :cry: Stu?

[xe Dan]

looks good rick want mine a bit lower here a pic of mine

http://i459.photobucket.com/albums/qq312/xedan/101_0001-2.jpg

[Joe Richardson]

does every corsa GSI have there jacking covers missing ? lol

[Lee H]

does every corsa GSI have there jacking covers missing ? lol

Think they must have been a factory option lol Mine is missing the front two like Ricks.

[Rickardo]

Dan, i'm loving the Speedlines.

Looks ace, how come your selling it?

[Joe Richardson]

Think they must have been a factory option lol Mine is missing the front two like Ricks.

Ive only ever seen one with all four jacking covers on,was a concourse one a lad posted up on here :)

[Rickardo]

I posted pics of building it, i might as well post some of stripping it.

http://i264.photobucket.com/albums/ii191/rickgpz/IMG_0391.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/IMG_0393.jpg

It's my mum, so no smart ar$e remarks about my bird.

http://i264.photobucket.com/albums/ii191/rickgpz/IMG_0398.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/IMG_0401.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/IMG_0402.jpg


Skateboards FTW


http://i264.photobucket.com/albums/ii191/rickgpz/IMG_0404.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/IMG_0407.jpg

http://i264.photobucket.com/albums/ii191/rickgpz/IMG_0410.jpg


http://i264.photobucket.com/albums/ii191/rickgpz/IMG_0412.jpg

Engine being sold tomorrow.

Massive thanks to Si and our kid for their help.

[Plug]

What a sorry sight lol

Take it you didnt swap it after billing

[TeddyThom]

Matt, £20 off fleabay. !2 wheel nuts and locking nuts.. Free P&P.

How much for a set of locking wheels nuts?? Damn man, I found some for like 7 quid with free postage and packing lol you need to search a bit more :thumb:

EDIT: I hate being tired when trying to type, makes me look like I didn't go to school or anything lol!

[Southie]

In that shot with your mum you look like a mini me version of the Hulk lol

This is what I like to see though, crack open that egg lol

I want the CDX alloys fancy some Astra 6 spokes Rick?

[novalicous]

http://i264.photobucket.com/albums/ii191/rickgpz/IMG_0407.jpg




Is the car at ground level or on stands because i know your not the tallest of lads lol

[stupot89]

it is craig i think lol