View Full Version : nova solid engine mounts C20XE
snell5339
26-11-09, 03:39 PM
hi 1st time on here. im looking for a set of solid engine mount for a nove with a c20xe engine. the power is just ripping the computation speck mounts apart?
can anyone tell me were i can get some or does anyone have some
dan
nova_saloon
26-11-09, 03:53 PM
www.chrisastleymotorsport.co.uk
snell5339
26-11-09, 04:01 PM
no gd. that what i destroyed. need to be completely solid. thanks
These are as solid as they get, unless you make your own
http://cgi.ebay.co.uk/Nova-Competition-Uprated-Engine-Mounts-Set-BRAND-NEW_W0QQitemZ350284260196QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item518e91a364
http://www.chrisastleymotorsport.com/product_info.php?products_id=45
And tbh, if an XE is ripping apart those, then something else is at fault, not the mounts...theres plenty of people on here running 300bhp+ LET's with no mount issues.
I'd suggest either launching a bit more gently or fit an engine damper to the top to slow the movement down.
thread hijack,
are solid mounts any good for road use or are they to much?
It could be somthing twisted putting more stress on the mounts casing them to fall apart.
On a road car there ok btw, just some extra vibration usualy. Brand new standard ones make a lot of difference though, after all most are 20years plus old.
yeh, i noticed my drivers one was fooked so was looking to replace them.
and not sure to go solid or just normal....
on a small engined road goin nova id stick to new std ones , the solid ones do make for a harsh ride lol ,
i still need to fit my solid ones to me XE but they can be a **** to get all 3 in , and looks like thats how mine is goin to play :(
nova_saloon
26-11-09, 06:11 PM
no gd. that what i destroyed. need to be completely solid. thanks
they are completely solid :S
nova_saloon
26-11-09, 06:12 PM
well i replaced mine with standard one and a lot of racers put cellaphane on the bottom and fill them with black mastic. makes them a little more solid, works good to
How can you destroy those mounts!!!!???
People run xe's on standard rubber mounts....
Ive got solids on mine, good choice imo!!! If you boot it and then let off, you can feel that the engine/box is not moving at all, everything just feels more "stable" if you get me. The gearstick doesnt move at all either.
Whereas on std's the stick mounts like an inch if you back off the throttle harshly lol
Mine cost £80 from tuning.co.uk, bit of a fcuker to fit, but just like all solid mounts. Yes they make the car vibrate on idle, but apart from that they are fine.
i still need to fit my solid ones to me XE but they can be a **** to get all 3 in , and looks like thats how mine is goin to play :(
I've only got the front 2 on mine its still rock solid!
MARTIN KELSON
27-11-09, 10:25 PM
I've only got the front 2 on mine its still rock solid!
How have you found that its solid?
You have never driven it lol
Does less than mine!!
:cry:
but it did make all the way to Billing! Tina's did too :)
http://img20.imageshack.us/img20/6526/mazzrs.jpg (http://img20.imageshack.us/i/mazzrs.jpg/)
Yes, yes it has, although it didn't sound too healthy when i was leaving :)
Hopefully getting a new box today though..
MARTIN KELSON
28-11-09, 08:48 PM
Mines been to...........
Crewe,
Stafford,
Market Drayton
See it has moved this year, just on a trailer & towed.
Did drive it when i went to pick it up from Stafford. Did all of about 600m under its own steam!!!
I'm guessing that:
Crewe is your engine builder
Stafford is Stu
And Market Drayton is SBD/Jenvey (TB place)
:)
And i got another F20 for mine now ;) Hopefully throw it in next weekend.
MARTIN KELSON
29-11-09, 08:32 PM
I'm guessing that:
Crewe is your engine builder
Stafford is Stu
And Market Drayton is SBD/Jenvey (TB place)
:)
And i got another F20 for mine now ;) Hopefully throw it in next weekend.
NO
YES
NO
Crewe - Ade who paints
Stafford - Stu electrics
Market Drayton - engine lifted onto mounts
Glad you got a new gearbox mate.
You gonna get it opened up to make sure its sound before you stick it in?
Yea, hopefully it will be the same 19/65 3.42, so i can just swop the gearsets :)
Its still in the boot of the Cav atm!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.