View Full Version : xe misfire help needed
I am havin a misfire on my redtop, it seems to be floodin cylinder no.4 so took it to bits to check valves.
All 8 inlet valves were bent and valve guides damaged, had them replaced and a light skim but it's still doin same thing when finally built it back up last night.
If anyone could shed any light on the problem it would be much appreciated
Russ
rubachuk
24-11-09, 11:03 AM
Had a similar thing recently.
Do you have the dowels in the block to locate the head on? In my case the dowels were missing so the head wasn't aligned properly (thought it would locate OK on the bolts) which meant valves didn't line up with the cutouts in the pistons. Probably made worse by an uprated cam and a well skimmed head.
8 new exhaust valves later and some dowels fitted its fine.
you mean the 2 bits what stick up from block on opposite corners, yeah they are seated right i think
have you timed it back up correctly?
yeah, all line up properly
air leak around no.4 injector mayb? or faulty injector
changed injectors and pressure reg, can't find any air leaks
sorted, must have been faulty ecu:)
Now i can torment people again
nova_saloon
26-11-09, 03:02 PM
all about tormenting :)
indeed, still got merit badge:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.