lowering springs

[torquey]

Since lowering me car 100mm on the rear, evertime i go over a bump the big washer that fits inside the car on the shock creates a gap and makes a banging noise when it comes back down. the car is on fk dampers could they be bottoming out? getting p****d off with it.:confused:

[nova_saloon]

replace what i think you mean is the bushes. but do you mean the front or rear?

[Adam]

Yes they will be bottomed out

[LEWI007]

Ive lowered the back of mne about 60mm or something, and i have the same problem.

I have a set of 100mm springs coming in a few days so its gonna get worse.

The way i think of fixing it is to get 2 rubber bushes one on top of the other, or space the gap out with some washers or something.

[torquey]

they are rear ones. thought about using some type of rubber washer will give it a go and see. cheers

[2drloon]

they are rear ones. thought about using some type of rubber washer will give it a go and see. cheers need standard bushes of the bottom as there thicker usually and mabe just put aspacer on tot to fill the gap?

[torquey]

right will try that got sum standard bushes cheers.