Fitting spoilers

[Mike]

What do you use to bond a spoiler onto metal work?

[AlexW]

tigerseal

[djbrowney]

sika flex or silicone

[mowgli]

that bonded windscreen stuff would stick lightning to a greased ferret, might be worth a try

[Mike]

Cheers chaps :) ill see what names mentioned pop up on eBay :)

Repz to you all :thumb: (except Mow as ive gotta spread some first :( )

[brainsnova]

go to a windcreen fitting place and blag a tube of the stuff but it doesnt fit a standard silicone gun so you'll need to improvise.

[mowgli]

go to a windcreen fitting place and blag a tube of the stuff but it doesnt fit a standard silicone gun so you'll need to improvise.

the stuff that we use to bond jcb windows in with is made by sika & is a std mastic gun size

[John]

As per other responses Mike, sikaflex, or 1k windscreen/glass bonder.

[Mike]

go to a windcreen fitting place and blag a tube of the stuff but it doesnt fit a standard silicone gun so you'll need to improvise.

They do fit as ive seen the catridges of it before :thumb:

ALTHO, even if they didnt, you can use the shaft of a hammer to force the contents out the cartridge ;)

[brainsnova]

:cry: the one my mate gave me did fit (i just remembered) but the side split as its not hard plastic like a silicone tube.

[16v Nova Kev]

is it a rubber or fibre glass spoiler mike

[Mike]

Fiberglass i think? Just a cheap one from eBay for the bread van Kev.

[16v Nova Kev]

we use this stuff in the bodyshop its a purple 2pak goes green when going off siht cant think of the name.....it would stick **** to a shinney shovel
http://i244.photobucket.com/albums/gg8/16vnovakev/SDC11721.jpg
we stuck his side skirts on with it i will text my boss and ask

[Jack]

bolts

[Spudly]

that bonded windscreen stuff would stick lightning to a greased ferret, might be worth a try



It does indeed, my spoiler was fixed to the cav bootlid with sickaflex and when i had to get push started cos the battery was flat it came right off, now its been bonded back on with windscreen sealant and it aint going anywhere, nip in your local autoglass or national windscreens, whatever you have and see if they will do it for a few beer tokens for you:thumb:

[Bubba]

woodscrews ;)

[Mike]

woodscrews ;)

On a Nova yea, on a 02 reg car, no thanks :p

[mowgli]

woodscrews ;)

factory fit on nissan 350z??

[Bubba]

On a Nova yea, on a 02 reg car, no thanks :p

i see no mention of what its going on ;)

[CoolTiger]

we use seam sealer in work, tigerseal ect mines stuck on with the stuff really good, and keeps the water from sitting under it aswell

[AlexW]

we use seam sealer in work, tigerseal ect mines stuck on with the stuff really good, and keeps the water from sitting under it aswell

But from what im told it dont even fit anywhere near the boot on yours anyway!

[Mike]

Right so, this spoiler arrived today, an it has some threaded bolts set into it, so i can drill straight thru the boot & bolt it down (bonus)

So i guess the same kinda silkaflex/tigerseal stuff is good for use as a bonder ASWELL as nut/bolt affiar?

[Jack]

Yep. Plus it'll help to keep water from leaking in through the bolt holes.