mk2 heater dials

[1389cc sri]

does any 1 know how 2 take the heater dials etc. apart on the mk2 dash because i want to colour code them but i cant seem to work out they they detach :?:

[whitey]

Yuo have to push something in the little hole and then wedge them out! You will see what i mean when u come to it!

[mikeoxford]

the center dial, pull the switch to turn on the heated rear screen, then look down left and right sides, push the two tabs inwards and pull on heater knob to slide out

[Freak]

Normally they will just pull off- except the centre one, which needs a screwdriver or similar in the hole usually.

[djp_y2k]

I'm really glad u asked that, coz i need to take mine off as well.

Came across the same problem as u.

[ade]

becareful when colour coding them - they have clear plastic in them so lights illuminate - cover this and you'll lose the lights - unless thats wot u want

[1389cc sri]

cheers peeps
ive managed to get em off now
should i spray trhem to match the same shade of blue as the outside
or should i just spray them any blue?
:Fade-col:

[Chris LR]

I'd try to match interior.....Seats, Cards etc

[mikeoxford]

I'd try to match interior.....Seats, Cards etc

:o Hark at Mr Standard agreeing with a modification!!!!! :lol:

[Chris LR]

Well SR's have colour coded Control Knobs, so it's ok