View Full Version : Twin 40's
Right im after a set of Weber 40's for a E16SE,
Ideally im after some carbs that have been receintly(sp?) refurbed and jetted for the 1.6.
Including manifold would be good also.
Well infact im after a complete working setup to bolt straight on with everything i need to get it running.
Let me Know Joe
georger252
20-11-09, 08:32 PM
my mates got a set of twin 40s on a 1.2 8v manifold.
let me know if your interested in the carbs.
cheers ryan
what are the carbs jetted for?
And also im not sure on what else i will need to get it up and running
dellortotwin40s
20-11-09, 08:34 PM
Ave got a set ov dellortos would want 300 for the lot but not posting pick up only but probz to far for you
lol google maps says 401 miles :d
7 hour trip up and 7 back lol
dellortotwin40s
20-11-09, 08:40 PM
to far then :D theyre jetted for a 1.6
move down to devon mate then sell the me :)
comptoncj
20-11-09, 08:44 PM
what are the carbs jetted for?
And also im not sure on what else i will need to get it up and running
You will need an alternator loweing bracket, a carb dizzy ( 1.2 1.3 1.4) and coil, then you should be ok, ive got all the jetting info for a 1600 if you want it mate?
yes please mate pm it over if you can
comptoncj
20-11-09, 08:47 PM
on its way mate
georger252
20-11-09, 09:37 PM
my mates got the lowering bracket. dizzy and coil to go with the carbs off a 1.2 carb and they were running on a 1.2 8v but dont know what they are jetted for tbh.
and i have a facet red top fuel pump for running carbs.
pm me if interested.
cheers ryan
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.