Twin 40's

[Plug]

Right im after a set of Weber 40's for a E16SE,

Ideally im after some carbs that have been receintly(sp?) refurbed and jetted for the 1.6.

Including manifold would be good also.

Well infact im after a complete working setup to bolt straight on with everything i need to get it running.

Let me Know Joe

[georger252]

my mates got a set of twin 40s on a 1.2 8v manifold.
let me know if your interested in the carbs.
cheers ryan

[Plug]

what are the carbs jetted for?

And also im not sure on what else i will need to get it up and running

[dellortotwin40s]

Ave got a set ov dellortos would want 300 for the lot but not posting pick up only but probz to far for you

[Plug]

lol google maps says 401 miles :d

7 hour trip up and 7 back lol

[dellortotwin40s]

to far then :D theyre jetted for a 1.6

[Plug]

move down to devon mate then sell the me :)

[comptoncj]

what are the carbs jetted for?

And also im not sure on what else i will need to get it up and running

You will need an alternator loweing bracket, a carb dizzy ( 1.2 1.3 1.4) and coil, then you should be ok, ive got all the jetting info for a 1600 if you want it mate?

[Plug]

yes please mate pm it over if you can

[comptoncj]

on its way mate

[georger252]

my mates got the lowering bracket. dizzy and coil to go with the carbs off a 1.2 carb and they were running on a 1.2 8v but dont know what they are jetted for tbh.
and i have a facet red top fuel pump for running carbs.
pm me if interested.
cheers ryan