View Full Version : Mk2 to Mk1 Headlights
matt_vaughan
04-11-09, 10:55 PM
Are the fittings the same?
If I take my Mk2 headlights out, and wack some Mk1's in, everything will just connect up the same apart from the electric adjustment?
Same for indicators i assume?
nova-taken
04-11-09, 11:05 PM
mk1 headlights use 2 plastic slots under the actual head light to hold it sitting right, and electric adjustment wont be compatible with mk1 head lights i dont think, not all too sure though
Your need to change the clips/brackets (whatever you want to call them) under the headlight, and the sidelight might need the wiring changing, then again the mk2 sidelight bulb holders should fit the mk1 lights.
nova-taken
04-11-09, 11:25 PM
not bad answer from myself then huh??
Good newbie
hehehe
not bad answer from myself then huh??
Good newbie
hehehe
At least your trying.
Oh and just leave the wires floating for the adjusters, mk1 is manual of course.
brainsnova
04-11-09, 11:45 PM
At least your trying.
Oh and just leave the wires floating for the adjusters, mk1 is manual of course.
tape them incase water pops the fuse lol
Pah you would never know if it popped the fuse lol
the small light (sorry, dont know the proper word) has a different plug.
craig green
05-11-09, 04:42 PM
the small light (sorry, dont know the proper word) has a different plug.
Yeah but the bulb holder will screw into the mk1 lens?
nova-taken
10-11-09, 06:59 PM
the small light (sorry, dont know the proper word) has a different plug.
sidelights??
matt_vaughan
10-11-09, 07:19 PM
is the bracket easily made up, or do i need to take a trip to a scrappies?
going to just strip wires and re-wire myself, always find it easier that way anyway.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.