cam carrier

[vauxboi]

can i use a gte cam in a 1.2i cam carrier. cheers

[John]

yes.

[General Baxter]

yes but what engine as the dissy drive

[vauxboi]

Dont know alls i know is 1.2i lol

[John]

Have a look in adams how to tune an spi guide!

[vauxboi]

ive already got one just wanted to double check but there was a thread in mechanicles also about how you might need to uprate the fuel pressure or something

[John]

http://www.pngclub.com/forum/showthread.php?t=93474

[vauxboi]

it has nothing on uprating fuel pressure do you even need to, can you not just slide the cam in and away you go lol

[vauxboi]

anyone lol

[vauxboi]

lol just want to know if i need to change anything to do with fueling

[vauxboi]

upski

[kent14sr]

Iirc the drive at the end of the cam would not fit your 1.2 distributor drive

Although otherwise it should fit in carrier etc etc

[vauxboi]

so it will fit in the carrier but wont work with the drive, im getting mixed answers here lol

[kent14sr]

Yes it will fit in the cam carrier

It likely wont fit the drive for your 1.2 dizzy though

What drive is the end of your dizzy? Slot type ?

[vauxboi]

hang on then if your saying it wont fit then that spi tuning guide is wrong, because it doesnt explain in detail it just says if you wanna change the cam use an injection type (gte/gsi), so ideally it needs to explain in detail what will need to be done in order for item to fit, because its made out as if things will just fit right on.

[kent14sr]

Just check it - take off your dizzy which is a 2 min job and see what the drive is. If yours is an SPI then I believe the drive is the same as a GTE/GSI but if its carb'd then different.

Adams tuning guide will be correct I am sure

In answer to your original question, a GSI/GTE cam will fit in the carrier!

[vauxboi]

there we go if your saying my spi is the same as a gte/gsi's drive it will fit, thats all you had to say none of this carb stuff lol