View Full Version : Welding
novanova636
26-10-09, 06:24 PM
Hi all just a quick question about welding. i have a clark welder can be used with gas or with out. i can get gas from halfords for £10 for a small bottle. problem is the triger on my welder is funked so when i turn the gas on at the bottle it comes out the nozzle constantly. So i have been thinking about trying it with out gas. I had a quick go with normal wire and the weld came out like a aero bar loads of air holes in it. A mate at work told me that you can get gasless wire from halfords and suposedly helps with the small air holes in the welds. Has any body used the gasless wire and was it any good?
cheers dave
bainyboy sr
26-10-09, 06:26 PM
if your welding the gas will come on so just turn the valve on when your starting toi weld would not advise not to use gas as welds turn out poor and weack
Jon_nova1
26-10-09, 06:26 PM
don't use gasless, yes, you'll get less air holes, but you get a hell of alot more splatter and welds are crap, just get a new trigger?
novanova636
26-10-09, 06:31 PM
i turn the gas on and off when i weld but one of the bottles dont last that long. i have looked into parts for the welder but cant find much about. A friend had the same welder and the same thing had happened to his so i think it is a comon fault. I was kinda thinking gasless weldeing would be pants. Does anyone know where i could get a larger bottle? Better value for money maybe
let_nova
26-10-09, 06:33 PM
you can buy an adapter to convert to big bottles
can you not take the trigger apart and see why its sticking?
as said, dont use gasless. utter poop.
try find an industrial supplier local to you, i wouldnt be able to use a big bottle with mine as the supply pipe is too small for a different regulator.
edit: let nova might be right. :)
novanova636
26-10-09, 06:37 PM
you can buy an adapter to convert to big bottles
any idear where from?
novanova636
26-10-09, 06:38 PM
can you not take the trigger apart and see why its sticking?
as said, dont use gasless. utter poop.
try find an industrial supplier local to you, i wouldnt be able to use a big bottle with mine as the supply pipe is too small for a different regulator.
edit: let nova might be right. :)
my pipe is also very small. i had a look at the trigger but cant see whats up with it!
let_nova
26-10-09, 06:38 PM
http://www.machinemart.co.uk/shop/range/details/gas-regulator-hose/path/welding-accessories
Jon_nova1
26-10-09, 06:40 PM
http://cgi.ebay.co.uk/Mig-welding-gas-co2-pub-bottle-paintball_W0QQitemZ280413726212QQcmdZViewItemQQptZ LH_DefaultDomain_3?hash=item4149f5e604
http://cgi.ebay.co.uk/CO2-GAS-REGULATOR-HOBBY-MIG-WELDER-HOSE-ADAPTOR-NEW_W0QQitemZ190340035267QQcmdZViewItemQQptZLH_Def aultDomain_3?hash=item2c512672c3
you may have to buy a complete torch if you can't find the trigger seperately
Don't get the machinemart one, i nearly did, then i found i could get a regulator for it too on the bay, link above
for gas, the cheapest is pub gas, theres no rental on it, you just pay whatever, then hope you can find a victim to fill it when its empty
novanova636
26-10-09, 06:40 PM
http://www.machinemart.co.uk/shop/range/details/gas-regulator-hose/path/welding-accessories
cheers fella!!!:thumb:
novanova636
26-10-09, 06:43 PM
http://cgi.ebay.co.uk/Mig-welding-gas-co2-pub-bottle-paintball_W0QQitemZ280413726212QQcmdZViewItemQQptZ LH_DefaultDomain_3?hash=item4149f5e604
http://cgi.ebay.co.uk/CO2-GAS-REGULATOR-HOBBY-MIG-WELDER-HOSE-ADAPTOR-NEW_W0QQitemZ190340035267QQcmdZViewItemQQptZLH_Def aultDomain_3?hash=item2c512672c3
you may have to buy a complete torch if you can't find the trigger seperately
Don't get the machinemart one, i nearly did, then i found i could get a regulator for it too on the bay, link above
for gas, the cheapest is pub gas, theres no rental on it, you just pay whatever, then hope you can find a victim to fill it when its empty
ok i will look into it! cheers for your help!!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.