exhaust question

[mowgli]

http://galleryplus.ebayimg.com/ws/web/260493240626_1_0_1.jpg

if i fitted this to my gte 1.6 engine, what system would i need to get to fit it?????

[GRUNT 16V]

What Engine Is It Off 1.3/1.4 Etc Etc???

[General Baxter]

you would need a hole for the o2 sensor :)

[GRUNT 16V]

you would need a hole for the o2 sensor :)
DEPENDING ON WHAT ENGINE E16SE /C16SE!!

[mowgli]

What Engine Is It Off 1.3/1.4 Etc Etc???

they say it is on a 1.6 at the moment, so i'm guessing an e16se.

and my engine is an e16se

i'm just hoping that someone on here has a similar one & knows what it fits...

if needs be, i'll just get the end cut & welded, but if i can get a simpler solution, then i will

[Iain]

I think 1.2/1.3 and 1.6 manifolds have a different angle? So you'll need either system to suit it.

Also measuring the bore would help find what system would match it nicely.

I assume one off Eurorallye would suit, but hard to say.

[mowgli]

a bit more work has narrowed it down to an ashley pipe, aren't they all 2"?

[Leeboo]

Ashley system bolts straight up the 4 branch, 4 branch stops a few inches shorter than twin downpipes

when I was swapping from std downpieps to a 4-1, (with std system), i had to lengthen the centre section to meet it, then i got an ashley system off a gte and it bolts up straight

[bmw156]

lol mowgli i was watching this

[mowgli]

lol mowgli i was watching this

you are welcome to it