wheel offset

[Morton]

can any1 tell me the offset for vauxhall 4 stud wheels ??
plus is ther anyy other car wheels that are known to fit vauxhalls like mini or pugeot or anything ??

[Welsh Dan]

ET49 is the offset. The PCD is 4x100.

[Ben]

BMW, VW, Renault will bolt onto the hubs but wether they fit or not is another story! As most other Marques the et is way off!

[jonn]

is this any use http://www.pngclub.com/forum/showthread.php?t=112122

[Morton]

Im lookin 13"x5.5j bt i want something nice but not expensive turns out there rather hard to find

[craig green]

Im lookin 13"x5.5j bt i want something nice but not expensive turns out there rather hard to find

That narrows it down.... Though at 5.5J you can probably stray a bit on the offset, prolly as low as et40. Don't let any wheel suppliers blag you into anything, they will tell you anything fits to make a sale. Sure the wheels might be 4x100 pcd, but making you grind your arches is naughty IMO. ;)

[Guderian]

Mk III Astra 13 inch (5.5J) Steels go straight on if you have the base model 155/80 x 13 tyres. Not very glamorous but if you are on a budget (and who isn't) this would be an interim measure. It does give more grip than 145's and is kind to the driveshafts if you get a decent make of tyre.

If you go up a stage and get wide lo-pros bear in mind the ride is going to be more jarry. There's a lot to be said for comfort in a car that almost takes off over bumps!