calibra xe loom query.

[John]

Never wired one of these looms before. it's out of a 91 calibra with dizzy and a lambda. Does this plug have to be wired in on this model loom? if so ign or permanent feed?


http://i97.photobucket.com/albums/l240/tooleater16v/xewiringpics002.jpg

This is the ecu id

http://i97.photobucket.com/albums/l240/tooleater16v/xewiringpics004.jpg

Also what's this plug for on the other end of the loom, ie in the car?

http://i97.photobucket.com/albums/l240/tooleater16v/xewiringpics003.jpg

ta!

[Mazz]

That first one looks like the permanent live which needs to be wired up, single pin iirc, not sure on the second one though..

[Rich]

first one is the ignition live i beleive, is it on the dizzy side of the loom?

Last plug im not 100% sure. The calibras had lots of extras on the dash display so possibly that which you wont need to use.

[John]

cool, so is it ign or perm live it needs connecting to then?

[Rich]

ignition live, if you wire it to a permanant you will be able to pull the key out and it will still keep running

[John]

ta Rich!