PDA

View Full Version : cam advice


novah108gly
05-10-09, 11:13 PM
wot would be the best cam to put in my 1.4 sri?? ment to give better performance isnt it???:thumb:
AlexW
05-10-09, 11:23 PM
Depends. Why not do other mods first, a cam change IS NOT easy.
novah108gly
05-10-09, 11:47 PM
Depends. Why not do other mods first, a cam change IS NOT easy.

any advice please:thumb:
Stuart
06-10-09, 08:58 AM
any "meaningful" cam is going to need the ecu to be binned and replaced with an aftermarket one.

or swap to T40's if you fancy.... both ways get similar results but the ecu route would be the one of choice imho.
craig green
06-10-09, 10:20 AM
Fast Road as opposed to race or rally cam. Assuming you are keeping the std inlet & ECU etc. With a 4 branch manifold, filter & some headwork you will see some nice gains, but don't expect it to transform the car.

If you expect lots more speed/acceleration, bin the 1400 & go for a bigger displacement.
GRUNT 16V
06-10-09, 10:29 AM
Nvo 62 Made By Kent Cams!!
novah108gly
06-10-09, 10:14 PM
Nvo 62 Made By Kent Cams!!


wot would this achive performance wise and thanks for the advice:thumb:
mrT
07-10-09, 05:42 AM
i had a piper cam(not sure what one),4 branch manifold-filter and a mongoose exhaust on my sri years ago--made 111bhp on the rollers,oh and it had about 120k+ on it,very good engines imo,