Might Break My Nova 1.6 16v Track/Rally Car.

[georger252]

Im thinking that if i get enough interest in the big parts i may break this up.

If i get a buyer for the shell and engine than i will definately break it.

anyway heres the spec...

It is a bright pink/purple shell, white inside, with a full weld in roll cage which goes through the dash into the front suspension strut tops and has door bars and a 'X' across the back.
The shell itself is in prety good condition for rust etc.. it has a tiny bit by the windscreen but the arches still have a bit of lip on them and the boot and floor and front valance are all solid as can be seen in the picture.
It will come with the brake bias pedal box system and hydraulic handbrake with braided lines running through the car. - £850

Full c16xe 1.6 16v engine conversion from a corsa gsi which has a 4 branch, cams and chipped ecu.
The engine will come with harry hockley mounts, shafts, loom, ecu, gearbox, protech 4 branch and full exhaust.
The engine starts up first time everytime and has never put a foot wrong, goes very well too. - £450

2 blue cobra monaco bucket seats with subframes for a nova - £80

1 red sparco 3 point harness and 1 green 4 point harness - £50 for both

mountney steering wheel with boss for nova/corsa - £40

sparco gearknob - £15

panel of switches that control the fan and horn etc and has a battery cut off switch. - £20


fibreglass boot which is on boot pins - £80

standard bonnet on bonnet pins. - £20

full gsi kit for a nova mk2 (front bumper has 2 holes in the side for mounting) comes with front bumper,skirts and rear bumper. - £80

2 litre 256mm brakes (very good pads and discs) - £60

Parts on their own
hydraulic handbrake setup its just attached to standard handbrake - £80
brake bias pedal box system - £100
full set of braided lines - £30
protech 4 branch manifold - £60
exhaust system sounds very nice - £60


Its the car in my avatar but the wheels arnt black and the skirts are black not pink.
im not sure how to upload pics yet so here are the links.
It current has no mot or tax but i can get mot if needed.

I also has a full twin 40 carb setup for this engine with inlet manifold which can go with the car at extra cost.
The carbs are on the manifold ready and have been already setup to run on the c16xe

http://s423.photobucket.com/albums/p...23-08-09-1.jpg (http://s423.photobucket.com/albums/pp317/georger252/?action=view&current=P1702_23-08-09-1.jpg)

http://s423.photobucket.com/albums/p...1_20-07-09.jpg (http://s423.photobucket.com/albums/pp317/georger252/?action=view&current=P191001_20-07-09.jpg)

http://s423.photobucket.com/albums/p...0_25-09-09.jpg (http://s423.photobucket.com/albums/pp317/georger252/?action=view&current=P1910_25-09-09.jpg)

http://s423.photobucket.com/albums/p...2_25-09-09.jpg (http://s423.photobucket.com/albums/pp317/georger252/?action=view&current=P1912_25-09-09.jpg)

http://s423.photobucket.com/albums/p...1_23-08-09.jpg (http://s423.photobucket.com/albums/pp317/georger252/?action=view&current=P150101_23-08-09.jpg)

http://s423.photobucket.com/albums/p...t=IMG_0301.jpg (http://s423.photobucket.com/albums/pp317/georger252/?action=view&current=IMG_0301.jpg)

i can take more pictures if wanted.

any questions feel free to ask.

the car is located in bristol.

LET ME KNOW WHAT PARTS YOU WANT.

Cheers ryan

[georger252]

ttt

[Spudly]

Forum rules require prices please bud.

[georger252]

yea i know the rules state i need prices but atm im just gauging interest to see if its worth breaking, ill get some prices up later if thats ok?
cheers ryan

[georger252]

Now with prices!!

[let_nova]

30 posted for braided lines?

[georger252]

how much you think postage would be?
and you want the whole set?
ryan

[vxr_racing_2008]

id defo take the bucket seats if you can courier them?:roll:

[let_nova]

only really need the fronts

[georger252]

ok mate well i may split as i might sell the rears with the hydraulic handbrake.
ill be in touch.
ryan

[let_nova]

need to know tonight lol

[Nobby]

decent pic of panel with switches etc?

[georger252]

ok well the cars still all togeather so they wont be off very soon.
yea ill get pics up of most of the stuff tomorrow and post them up.
cheers ryan

[let_nova]

well when will it be then?

[georger252]

if i get enough interest then i will be taking it apart in the next week.
i just need a buyer for the shell.
cheers ryan

[georger252]

ttt

[georger252]

up

[boffer8]

interested in the 4 branch and the rad top hose aswell if you can chuck it in? ;) and maybe the carb inlet manifold too

[georger252]

ok mate i may have someone interested in the shell as soon as i know ill get put up that im breaking for definate.
cheers ryan

[georger252]

ttt