PDA

View Full Version : weber 45s with xe manifold.



bmw156
15-09-09, 12:33 PM
hey guys,

im after a set of twin 45's with the manifold for an c20xe

also an alternator lower bracket, and all else needed.

WHY

xe Dan
15-09-09, 04:44 PM
you need 45s mate as 40s dont flow enough for the red top

16v Nova Kev
15-09-09, 08:13 PM
you need 45s mate as 40s dont flow enough for the red top

what he said :thumb:

bmw156
15-09-09, 08:44 PM
oooo ok, thanks guys.

16v Nova Kev
15-09-09, 08:59 PM
so your fitting a dizzy then

bmw156
15-09-09, 09:01 PM
ummmm, would i need a dizzy if i was to run aftermarket management, or would that give me a coilpak

16v Nova Kev
15-09-09, 09:09 PM
jeeebus lol carbs=dizzy coilpack=throttle bodies
you could run carbs on management but really not woth it.
im going for r1 bike bodies and megasqirt should get it all for 500

Sloth
15-09-09, 09:12 PM
if you use megajolt you can use a coil pack. if you go for a dizzy, you need a mk2 cavalier 1.6 dizzy and wiring loom. i have a xe carb mani here mate.

John
15-09-09, 09:16 PM
You can run carbs on management! Both martin kelson and phil lofthouse use/d it with carbs to very good effect!

bmw156
15-09-09, 09:30 PM
ok thanks guys, and sloth, as discussed lol

bullseye
18-09-09, 01:24 PM
Got a manifold I was considering letting go of
let me know if your interested and i'll take a couple of photo's