View Full Version : The Bread Van
After doing a bit of this....
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0955.jpg
And getting rid of a 2 year garden ornament....
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0957.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0956.jpg
Selling all my parts, paying off 4 credit cards (scary i know!) saving a bit here, wheeling, dealing & doing some other stuff here an there..
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0959.jpg
I ended up getting owed a favour, at first it was ok, then after a while it took the pish, then after a bit longer i was pished off..... one thing lead to another & I ended up with this late yesterday afternoon....
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0969.jpg
As you can see, the previous owner needed rid of it in a hurry (RE: The favour he owed me)...
So this morning (12th September) I opened her up.... an found this sh1t...
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0960.jpg
My wheelie bin at 9am this morning..... dirty, smelly, not a nice place to venture. A bit like this van....
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0961.jpg
Some time later i found this little lot
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0962.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0963.jpg
And come 11am... this sh1t...
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0964.jpg
Tada!
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0965.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0966.jpg
Found this crap up front...
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0967.jpg
Rinsed the hoover round & generally minced about..
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0968.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0970.jpg
And spent the last 4 hours cleaning, polished, t-cutting an such like....
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0971.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0972.jpg
Up front i also found the original bill of sale, delivery confirmation stuff, dealer booklet, an other bits an bobs.
Tomorrow is fix all the broked stuff time.
Wiper stick has been snapped off, interior lights have a w@nk connection an barely work, spare tyre is FUBAR & brakes need bleeding.
Then its subtle modding time i thinks.
Tidy :) Mustn't grumble for free. Does the navman work?
Tidy :) Mustn't grumble for free. Does the navman work?
The navmans funked but the Dewalt charger works lol EDIT: BTW i did pay for it, just not much at all ;)
Originally i was going to buy it off him for a "nice" price, but yea that soon changed lol
02 reg, 116k, Cat D December 03, front end impact insurance repaired 11th June 09, funk all other history other then a windscreen that was fitted Thursday morning just gone an a cambelt saying it was changed 30k ago, front disc's & pads were changed about 6 weeks ago.
Alternator belt is that shiny you can see your face in it so that'll be changed, wiper blades are FUBAR but meh dont need them until winter. Bonnet need replacing & ive gotta go to my local GM Dealer an get the keys cut so I can remove the roof rack (genuine GM locking rack to boot)
Taxed till 31st October, MOT till 19th November :) very good little runner.
thats cool, i want it lol
damn it i need a windscreen :(
If you look carefully Ste, theres a proper retro Adidas trainer in the wheelie bin, ive only got one but you can have it well good cheap?
EDIT: TBH i should have took some pics of the cab before i cleaned it, it was worser then the boot!!
Does it wheelspin though?
Z20LEH time???
lol looks good mate was after one of them for work until i realise how much it would be for me to insure
Z20LEH time???
lol looks good mate was after one of them for work until i realise how much it would be for me to insure
£402 a year for me via Sky.
Does it wheelspin though?
Not tried yet but i will sit at a tonne all day long.
if my 1litre spins that will lol
good price on insurance :thumb:
if my 1litre spins that will lol
good price on insurance :thumb:
My 12v Corsa B spins ace lol but the limiters well **** lol :(
Yes, i am a chaver i know this.
limiter whats this you speak of lol
limiter whats this you speak of lol
Jimbo, those 12 volts have limiters, trust me on that one lol lol
If you look carefully Ste, theres a proper retro Adidas trainer in the wheelie bin, ive only got one but you can have it well good cheap?
lol dont want a retro trainer :p
lol dont want a retro trainer :p
What about an 18v DeWalt charger or a Navman with a bust screen & no charger? Adidas aftershave? Pair of 60w external lights? 240v heat/smoke alarm? Mate i got loads of stuff you can have from out this van lol
Even found £3.60 in change in there :) winner!
BTW, also found the clutch pedal rubber cover in the ash tray lol lol
The pearce de resistance is the engine tho, the guy is a tool lol owned it over a year & had no idea hahhaa!
LMAO, good bargin though, me still want lol
LMAO, good bargin though, me still want lol
lol
You can get these for around the £1200 to £1800 mark now Ste for a decent one with about 80k on, or pay top whack at £2500++ for a low milage minter.
Theres a really nice one on the bay at the mo, highish milage but was at a good price last time i checked.
Mine will get some TLC, few goodies here an there an next show season i suppose ill pimp it about lol had that Corsa B & been a tigh @unt so long now i think its time for another project motor lol lol
I hope you didnt send your old shell off to die with the front grill still on did you dude?
not really in the market for another got, got the mrs corsa c to tootle about in, and my eerrmm, valver corsa if i ever finish it
only one i'd own is a white one, grey bumper's - dunno why but i love that combo together..
added on that a set of sxi skirt's and spoiler in grey to match, with a nice engine, perfect lol
not really in the market for another got, got the mrs corsa c to tootle about in, and my eerrmm, valver corsa if i ever finish it
only one i'd own is a white one, grey bumper's - dunno why but i love that combo together..
added on that a set of sxi skirt's and spoiler in grey to match, with a nice engine, perfect lol
Yea they do look pretty cool, im thinking about robbing my sisters SXi of its side skirts lol or phase 2'ing it complete with projector headlights an lower fogs. Irmscher spoiler & rear box or something like that.
I hope you didnt send your old shell off to die with the front grill still on did you dude?
Nah its all in a safe place for future good times Spud :thumb:
Nah its all in a safe place for future good times Spud :thumb:
Cool i shall have to persuade that out of you then bud;):thumb:
Yea they do look pretty cool, im thinking about robbing my sisters SXi of its side skirts lol or phase 2'ing it complete with projector headlights an lower fogs. Irmscher spoiler & rear box or something like that.
prefer the ph1 look myself, but with the ph2 projector light's
Diesel or petrol? i may have a ph2 projector beam headlamp somewhere form when i was at vaux.
I just want body colour bumpers Ste, just er because why not :)
eBay FTW, £12.90 delivered, Corsa C ISO lead, CAR2003 radio removal pins & Corsa C single DIN stereo fascia. Winner :)
Next up, Team Dynamics Pro Race 1.2's in white :)
Diesel or petrol? i may have a ph2 projector beam headlamp somewhere form when i was at vaux.
Dirty Dieseasul John :d
robertdevlin69
12-09-09, 07:04 PM
is it a turbo derv?
Today i as mostly been to my local dealer for some bits & bobs.
Should have a nicey nice parcel landing there soon with an assortment of bits for this freaking van. And of all things, the MIGHTY KEY OF LIFE lol to remove the god awful roof rack
Amongst other things, some boost goodies should be arriving at some point when I get my ass in gear & buy them. Altho have dug out ye old intercooler spray kit :) just for good measure.....
Currently got my eyes on some Team Dynamics Pro Race 2's in White & some Corsa VXR seatage so we'll see what happens with them. Wind deflectors should be here anytime soon aswell as a K&N induction kit :)
Sounds like it's gonna tidy up quite well :d
Sounds like it's gonna tidy up quite well :d
That too, but tax relief is a winner :d its my company vehicle :p
I took on a good blast to Stafford this morning to see a few peoples & check out some jobs. Some of the lads were like "you finally opened your wallet & got rid of the crock of sh1t Corsa then" lol lol
What they dont know wont hurt them :)
have you still got the roof rack?? or sold it?
have you still got the roof rack?? or sold it?
Still got it chap, only ordered the key today for it & should have it by Thurs/Friday latest.
This needs sorting out too :(
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0980.jpg
The old girl :) the fun ive had in this old beasty lol
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0981.jpg
Strange thing is, when i park this van next to my sisters SXi, her car is higher in the archs but the shell roof hight is lower then my van? But my van looks lowered to start with?
looks smart.
did you have the nova crushed???
General Baxter
15-09-09, 10:11 AM
mike ill take the outdoor lights, pikey FTW lol
looks smart.
did you have the nova crushed???
Nah the shell is in safe storage just had a reet funk about getting it moved as couldnt get a trailer :(
The PIR lights aint for sale Nick lol
Mike found it! It's just missing the lower securing bracket.
http://i97.photobucket.com/albums/l240/tooleater16v/009-7.jpg
http://i97.photobucket.com/albums/l240/tooleater16v/008-10.jpg
Fiver if ya want it?
Your secret/unoffical XE project seems to be coming on well John lol Was only an alt cut out last I saw :p
Your secret/unoffical XE project seems to be coming on well John lol Was only an alt cut out last I saw :p
yeah tis nearly done now.....;) . Anyway.........
Fiver if ya want it?
How hard are the brackets to get John? If its an OE peice on its own ill take it for £5 like.
Had a boring audio instal filled afternoon today :( this arrived :(
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0982.jpg
Couldnt find an allen key small enough to remove the standard Car2003 radio/cassette (think ive left the keys in the Nova) so a swift blow to the front with a claw hammer soon removed it :) happy days :)
Also been back to my dealer (yes bruv! Brap brap 2 ounce please!) about this roof rack key, basically the GM Dealer Security service melarky, i had to prove who i was :confused: but meh.
Still no parts for me to pick but been assured end of week should see some parts for me :) win.
Done a bit more shopping on eBay this evening for some odds & ends to keep my hands busy for an evening or two.
Oh yes, that DeWalt charger i found when i opened the boot, tested it, put it on eBay, £20. Winner!
It's just a plastic piece with a hole in that's snapped clean off (the lower mounting hole) easily fixed with a piece of metal riveted to the ribbing. :)
It's just a plastic piece with a hole in that's snapped clean off (the lower mounting hole) easily fixed with a piece of metal riveted to the ribbing. :)
Cool, ill take that off your hands John, any gen on what bulbs those projector lights use aswell? Incase any have popped like lol
Dont
It's just a plastic piece with a hole in that's snapped clean off (the lower mounting hole) easily fixed with a piece of metal riveted to the ribbing. :)
Cool, ill take that off your hands John :) any gen on the bulbs they use? They some odd size/shape thing??
Dont suppose you happen to have a Corsa C Irmscher spoiler kicking about at all LOL lol
Cool, ill take that off your hands John :) any gen on the bulbs they use? They some odd size/shape thing??
Dont suppose you happen to have a Corsa C Irmscher spoiler kicking about at all LOL lol
There's no bulbs in it mike, i think they're exactly the same as the older lights though. Sorry no spolierlol
Ah even better then. Ill try my bulbs in it an see what happens. Er, hmm, cant make it over this weekend to pick it up as im going on a mincing sesh at Lee's lol
Will have to sort something out but i could pop over one night next week if you like?
Ah even better then. Ill try my bulbs in it an see what happens. Er, hmm, cant make it over this weekend to pick it up as im going on a mincing sesh at Lee's lol
Will have to sort something out but i could pop over one night next week if you like?
No rush fella, whenever is cool with me. :)
No rush fella, whenever is cool with me. :)
Cool ok matey.
There over £200 a side from Vaux :eek: excluding vat!
Cool ok matey.
There over £200 a side from Vaux :eek: excluding vat!
pmsl! for a plastic headlight! Good old vauxhall!
Tell me about it!
31 whole pence for the rubber seal for a Corsa C fuel cap lol kinda makes up for it i suppose lol
Picked this shizzle up today, but need to go back to GM to order more bits :O
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0987.jpg
Drivers door seal - awaiting fitting..
Fuel cap seal - broked it :( need to re-order
Fuel cap locking thing - superceded part number replaces the one i need, had to mod/chop it to fit :(
Key of life - no more vibrating roof rack at 85+
Window winder arm - doesnt come off in my hand anymore. Win.
Wiper twig - I can now see when the clouds fall!
Total cost £45 something.
If i can, tomorrow its order a new fuel cap seal (no.2) the four plastic caps for the gutter rails where the roof rack was fitted, steering coloumn shroud & probably some other tat that'll break come tomorrow morning.
scott.parker
16-09-09, 08:29 PM
FIX it, and **** it off, then buy a jap crap your really craving!
FIX it, and **** it off, then buy a jap crap your really craving!
This is work hack/show mobile/daily driver in one Scott lol
But your right about the Jap cack :thumb: im getting a massive hankering for either a 106 GTi or EG Civic. I think its going to be the Civic purely because teh dollar is down of late so ebay.com is a good place to shop right now :thumb:
Well ive been mincing about again lol
Sunday just gone got down & dirty funking about with it again.... changed the torn drivers side window rubber, now i have a window that works :) picked up a new steering coloumn shroud from GM to the iffy looking one...
Removed the mirror caps & body coloured them, which turned into a mare :(
One was genuine, one wasnt. I plastic primered them then gave them a light coat of white.... the replica part reacted like a mofo!!
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0988.jpg
Hours & copias coats of primer mixed with shed laods of wet & dry later i got it something like.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0989.jpg
Finished sunday evening off buy getting them both into Glacier White finish & fitted them Monday morning.
VXR stubby ariel arrived an was chucked on on Monday, today some wind deflectors arrived after a massive eBay debate (took 2 weeks to arrive yet paid for 2 day delivery?)
Got some ply lining done to the interior metal panels an thats about it really. Ill fire some pics up one day for those that give a monkeys lol
After spending an afternoon mincing with Diesels motors, i got down an dirty with Google an found a place called "TorqTec"
Chipset for this motor allegedly gives me +12bhp but +40lb/ft torque! So thats 170lb/ft according to there site?
Shall be calling them tomorrow me thinks.
Not read the whole thread, is it 1.3 or 1.7 Mike? CDTi or DTi?
1.7 Di lol
with a little extra "oomph" ;)
So no 't' in sight then :(
So no 't' in sight then :(
Er well.... :d :thumb:
Eh? it should be a y17dt mike? (1.7 16v isuzu turbo derv)
Eh? it should be a y17dt mike? (1.7 16v isuzu turbo derv)
It is John, but for some strange reason its incredibly quick. On the way to Baxters today it was off the clock with a Golf GTDI behind me that simply couldnt overtake :confused: i wasnt pulling away but he wasnt gaining like.
It is John, but for some strange reason its incredibly quick. On the way to Baxters today it was off the clock with a Golf GTDI behind me that simply couldnt overtake :confused: i wasnt pulling away but he wasnt gaining like.
sounds like it's just run in mike!
sounds like it's just run in mike!
lol sound then :) will call this TorqTec in the morning an see how much there going to con me outta for a chipset lol an see what i can do with a bigger charger.
Altho the Y17 its got fitted is a non intercooled engine :tard: how pants lol
Last few weeks has been general mincing about, clocked up another 2k miles aswell :(
Ask no qeustions, tell no lies got me a facelift @rse end bumper in silver a couple of days ago. Got hold of r kid who works at Hydrex an got him to bring his works van round on Sunday, complete with a compressor, lent his spray gun to got jiggy with it....
Come monday midday when i was back from work it was time to start... with this...
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0991.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0993.jpg
White primerd by 2pm & then a quick blow over with a thin coat of Glacier White come 5pm aftre going thru an entire 20kg Calor gas bottle keeping the garage warm :( ended up using a 240v elec heater :S
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0994.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_0995.jpg
Now its just wet & dry it flat, an get some colour onto it. Pair of Facelift rear archs, pair of facelift rear fogs an it can get fitted.
carrie_girl_wonder
21-10-09, 06:59 PM
aha Mike likes fudge :d
Last few weeks ive been a little busy mincing about at home doing things like this...so the motor has took a back seat.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1014.jpg
But ive had to get back on it as things started to break...
The bread mobil has some work, new GM battery, alternator & belt, had to change a FUBAR headlight which kept popping bulbs.... becuase of a fook of hole in the back of it...
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1029.jpg
Picked up a cheap as chips spoiler of eBay a few weeks ago, got it painted & got it fitted today being as im at home.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1030.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1032.jpg
Then went on to debadge the boot, which leads me to a problem. Corsa's have a 3mm & 5mm hole hiding under the Griffin. Bugger.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1031.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1033.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1034.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1036.jpg
So thats a job to sort out another day as I really CBA due to epic sickness I've currently got :(
Once said holes are sorted & the facelift rear bumper is on, its colour code the grab handle an the rear end is finito.
the vans looking good mike doesn't take alot to make these corsa's look good
heres mine
http://img.photobucket.com/albums/v631/6666666/the%20pearl/100_0972.jpg
Thats just what im after Mike^
The facelift front bumper & Irmscher lower thingy. I shall get on the case of that after before christmas, an itll give me something to do during the holidays :)
The price of the Irmscher grill's is a bit of a pish take though lol
they bloody are a pish take mate, but i forked out alot to get the bumper then the irmscher splitter and then the bumper smoothed so i thought i may aswell get one look abit daft with out it lol
Yea worth it when using a facelift front end really, tidys it up a treat i think.
Saying that though, all the Irmscher parts are silly pricy :( but i suppose what i saved on the facelift rear bumper will make up for paying thru the ass for the front end lol
Gave it some more TLC today...
Chucked an Opel Blitz badge on the boot to cover the two little holes, an fitted it out with a K&N panel filter as the OE filter is deathed up.
Whilst i had the airbox off i made swiss cheese of it, just because i could. And removed a little air restrictor thingy I discovered inside the airbox inlet.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1037.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1038.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1039.jpg
Result, boost a lot more argressive then it ever did & sounds a lot deeper. Well, for a diesel anyway.
Undecided on the boot badge, so might remove it for a Holden badge, or just flush the boot completely & remove these damn holes...
scott.parker
12-12-09, 05:06 PM
lol at you drilling holes!
Have to have a look at it tomo, i say keep the blitz badge my self!
lol at you drilling holes!
Have to have a look at it tomo, i say keep the blitz badge my self!
Serioulsy Scott, the airbox inlet is 1 an qaurter inch. Its tiny!!
Ive been scouring the internerd for the original intercooler for this engine, still to no avail :( once ive got one & got it fitted ill whack the boost up an see what happens :cool:
scott.parker
12-12-09, 05:17 PM
Cool, sound like it should be fun!
Dont spend too much on it tough..
Im not planning on spending loads on it lol lol just doing the odd bit here an there, definetly gonna chuck some alloys on it at some point though.
djbrowney
12-12-09, 05:43 PM
oh i so need a little van like this lol
nice van :thumb:
oh i so need a little van like this lol
nice van :thumb:
Buy this one in the summer so I can have an Astra Sportive SE then :)
djbrowney
12-12-09, 05:49 PM
well im not sure how much longer my job is going to last with the current state of affairs, if i do get layed off im going to start my own upvc/lock repair business so looking for a little van really lol
I struggle to fit a 600 kithen base unit in this van lol so you wont fit an uPVC windows in there lol lol
Altho i keep hearing good things about the Corsa C Combi's from the other traders on site? I can highly recommend T220 Transit Connects & VW T5 Transporters!
Im not planning on spending loads on it lol lol just doing the odd bit here an there, definetly gonna chuck some alloys on it at some point though.
That's how it starts! lol
djbrowney
12-12-09, 06:32 PM
I struggle to fit a 600 kithen base unit in this van lol so you wont fit an uPVC windows in there lol lol
Altho i keep hearing good things about the Corsa C Combi's from the other traders on site? I can highly recommend T220 Transit Connects & VW T5 Transporters!
its not the fitting them mate its repearing them, espag's,muliti point locks, friction hings, keeps, gearboxes the list goes on with what can break on themlol
i drive a 09 plate long wheel base transit at the min but i wont be able to afford to run anything that size was thinking a combo van :thumb:
Ah so you will have heard of ERA locks then lol i done an apprenticeship on Modern Engineering, Steel Fabrication & Production Engineering with them many years ago lol
The Corsa C Combi's are fab little vans mate!! They have the same common problems as all the other Corsa C's Diesels thought. The alternator problem (which ive already had) & also the Fuel ECU (they have 2 ECU's), the fuel ECU is about a £400+vat fix if you buy a new one :(
Got a bit bored, very bored infact & couldnt think of fook all else to do other then go shopping for wine. Ended up coming home with these....
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/fli.jpg
FLI Integrator 6
6 inch ways, 70 watt RMS, 210 peak.
Got home, went to set about fitting them & ar kid called me up, hes some how managed to stack his FTO Mivec, slid it on ice into a kerb stone :S but there is no ice, anywhere? So ive been collared into changing a bottom arm & drop link instead of fitting my new toys.
Worst of all, I have no wine :( bugger.
ive always been a fan of the fli range. very good value imo
scott.parker
18-01-10, 12:23 AM
Just dont put the chav sticker on your window, as the locals will ravage it like the nova did! lol
Luke, £25 they were :) also found ive got wiring in the door for the tweeters fitted to better spec models so might re-run them into the rear an fit a couple of 6" speakers in the side lining panels lol lol
Scott, the FLI stickers are reet smart TBH, not something I;d want on the side of a van for obvious reasons as you mentioned.
Im now left with a pair of FLI speaker covers & some JBL speaker covers to flog on eBay to some random goon lol
Will get some pics later of my epic mincing today which turned into a mare :(
Todays audio filled installment.
Got busy with this earlier today...
Whipped the pass door card off, greeted with this :tard: some ones been here before me i see...old speaker out (which are ident to Corsa B door speakers BTW) an got the adapter in place (pictured)
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1090.jpg
Old v's new
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1091.jpg
Door card on. Hidden.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1093.jpg
Drivers door, a lot different to a Nova, an a pain in the rear to work with...
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1094.jpg
Done the same again, 10 minute job done. Better sounds for £25 a half hour work. Result.
Pleased with them aswell, very pleased, just been round & about an gave them a rather good work out to this (http://www.youtube.com/watch?v=-4iJ8aCH_oc). Top performance.
This is where the day went south tho, for some time now there been a minor water leakage into the drivers side footwell. As with most things, it gets bigger with age & is now Niagra falls.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1096.jpg
Off came the drivers side roof strip, screen edge trim, out came the water bottle, the wiper arms, the top scuttle panel section 1 & 2, the lower scuttle panel, wiper motor pump, heater blower thing an some other plastic panel that we'll call "WTF"....
I found these two holes in the shell & a gap in the shell seam were it looked liked it hadnt been welded together!! Water is running down the screen edge into the smallest hole, an water is dripping off the wiper linkage straight into the bigger hole...
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1097.jpg
Silcone. Clear silicone & fcuk loads of it!! Temp fix ahoy!
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1098.jpg
Whilst i had the roof trims & screen edge out, cleared all the sheet outta there, cleaned the rubber screen seal, checked under the base of the windscreen for a good seal, all was gravy so put it back together safe in the knowledge that one day itll dry out :) well happy.
No. Bull**** & you know it is Mike.
What actually happened is my sister came home in her C, I wonder if her shell has the same holes?
Yes, it fcuking does & hers doesnt leak there, it leaks in the boot an rear cabin area instead.
All in all, smashed fcuk out my knuckles for 5 hours & achieved pretty much naff all.
Any one wanna buy it, I want an Astra Van instead.
http://i97.photobucket.com/albums/l240/tooleater16v/009-7.jpg
:wtf: has that head been turned around?
:wtf: has that head been turned around?
No you doyle, the picture has been taken from the nearside looking at the bay, under where that headlight is sat is the wiper motor and the sheet is covering the screen, you can see the blower motor behind the light too......:roll:
Good mincing skills Mike:thumb:
djbrowney
20-01-10, 07:23 AM
how much mike ?????????????????????????????????????????????
Novaboi_1991
20-01-10, 07:33 AM
No you doyle, the picture has been taken from the nearside looking at the bay, under where that headlight is sat is the wiper motor and the sheet is covering the screen, you can see the blower motor behind the light too......:roll:
Good mincing skills Mike:thumb:
Admittedly as soon as i saw his comment i had to look twice, that pic is kind of decieving,
mike, let us know how those speakers are, as my local halfords has them on clearance atm, was considering getting a set for the van,
Cheers.
No you doyle, the picture has been taken from the nearside looking at the bay, under where that headlight is sat is the wiper motor and the sheet is covering the screen, you can see the blower motor behind the light too......:roll:
Good mincing skills Mike:thumb:
lollollol My screen brightness and contrast is set low so I cant make out dark areas, if I have the screen much brighter it hurts my eyes :(
mike, let us know how those speakers are, as my local halfords has them on clearance atm, was considering getting a set for the van,
Cheers.
Well worth the £20 odd quid i paid for them chap. If you can get them for less then that id defiently suggest a pair of them.
Give it a wash for the first time since September yesterday, had a quick nosey again under the scuttle panels & i *think* it might be the brake servo to bulkhead seal thats perished & is letting water in.
Only way to find out is the mamoth task of taking out the dash, coloumn & servo to check it.
Never done that to a Corsa C before, so im sensing a whole load of fail already :(
Novaboi_1991
20-01-10, 07:26 PM
aah your be ok mate... what could happen, lol,
think il get down an get some of those speakers when i can, although, i should find out why the speakers in the van arnt actually working... wish me luck lol...
Big time catastrophe :( engine let go this morning :(
fixable ?
or big hole in the block jobbie ?
Locked itself up :(
Thankfully, after 2 hours or so of mincing, ive found the problemo! Relativly simple fix that came in a preminition from the gods of automotive death lol
So whats up with it then bud?
So whats up with it then bud?
The alternator.
Its blew itself to bits proper bo shank, its bearings have made swiss cheese outta its internals & seized it up (could explain the nice cloud of electrical smelling smoke that came outta it)
Believe it or not, the way the belt is on these Y17 motors, it locks the engine up if the alternator seizes.
I started stripping the engine down, then had a massive preminition (im actually not joking here either!) an started tracing the belt round the motor.
Put a 19mm on the cam sprocket, would budge more then 5mm either way. Whipped the alternator belt & hey presto :) ended up doing the 1 foot skank round the driveway as ive now got a useful but semi fcuked £1k engine :) instead of a completley SNAFU one :d
Lmfao thats some good skills man, get yo ass to your local vaux dealers tonight with a hacksaw lol
Lmfao thats some good skills man, get yo ass to your local vaux dealers tonight with a hacksaw lol
I know how to open the bonnet on them from the outside lol an the lower spec models dont have alarm triggers under the bonnet either lol
So all in all this week, i seem to have cured my non working key fob & appear to have sorted water leak but have gained an engine failure of epic proportions.
Its now kinda half put back together, i got bored an left it.
scott.parker
21-01-10, 04:44 PM
lol your lucks almost as bad as mine!
And these newer (take that as post 95-98) engines suck, what the frigging deal with making ONE belt drive more then two things eh, hence when the fan belt eat it's self on my passat i lost power steering and the coolant pump stooped, so overheated!
Glad it's not as terminal as first thought though mate.
Scott
Scott, there sh1t mate. Really they are.
After spending nearly 7 hours today looking round a bang upto date modern day diesel engine, i really wish i still had that sack of cack Nova D van as I know that would run wether its broke or not!
As nice as modern cars are to drive, they suck the big donder tbh.
Couple of random pics before I got real messy black hands
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1100.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1101.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1102.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1103.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1104.jpg
Heard back from the company that supplied my alternator, gotta send this fooked one back & they'll send me a new FOC :)
scott.parker
22-01-10, 08:11 PM
Cool, dam them glow plugs are well long! lol
They get fcuking well hot too!
I was more amazed at the weirdness of the head & stupidly mahooosive thick cams lol
Last two day have been a Commercial vehicle mare :cry:
Was having a little mess about at some traffic lights, one thing lead to another & the airbag on our Connect decided it wanted to go off lol
Spent forever yesterday prodding to tiny little holes in the back of its steering wheel removing the airbag, also changed the wheel in it for a leather ST one :d
Alternator No.2 turned up yesterday eve aswell, so spent from 11.30am today until 5pm ish working on this sack of cack
Mare to change & route of all evil...
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1105.jpg
Anyway, got that on an the bloody thing wouldnt start! Bleed the fuel system & its still a no go (2pm by now) so cracked on changing the rocker gasket (paid for 1 but 2 turned up?) & glow plugs. Tried again, still wouldnt start, but noticed the glow plug light on the dash wasnt coming on?
Initial thoughs were the Fuel ECM was dead, called a man that can at Vauxhall & he came back with a price of £598 without VAT :eek: thinking the ECM was dead i opened it up & its fooking amazing inside!! Wish id have got pics TBH as ive never seen anything like it!
Anyway, soon got bored & though ill refit the ECM to the car so its "safe & secure" an tried ignition on the off chance.
Fcuking thing only started perfectly :tard:
Only side effect is, the managment light wont go out & the engine fan is constantly on :confused: will fix that another day tho.
Still havent fixed the EML/Engine fan problem lol so im off to my mate Martin at MBA Racing on Saturday to borrow his diagnostics machine :) should cure it. Hopefully.
Had these arrive:
SXi interior door release handles
SRi handbrake lever
Replaces the nasty tacky black ones a treat
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1118.jpg
After some of the GM tweeters for the inner mirror covers & a CD changer, new seats an then back to exterior.
scott.parker
04-02-10, 05:16 PM
Should of stuck with the nova! lol
need an SXI/SRi gear knob & leaver, if it's not got one, sooo much nicer than a standard one
Should of stuck with the nova! lol
Fook that lol would've meant id have to actually finish building it first!
need an SXI/SRi gear knob & leaver, if it's not got one, sooo much nicer than a standard one
Didnt know the lever was any different? Ive seen the Irmscher gearknobs but fook am i paying £80 for one :eek:
yea, it's shorter than a normal one
http://i175.photobucket.com/albums/w142/jamesmiddleton4/Image015.jpg
Oh very swish ehh, will get my hands on one of them from the breakers on the weekend. Nice one Ste :thumb:
no prob's, i've got one in mine, soooo much nicer :)
no prob's, i've got one in mine, soooo much nicer :)
They hard to fit mate? As ive heard bad things about the plastic gearlinkages being delicate?
really easy, 5min job
guide here if you want it :)
http://www.corsa-c.co.uk/forum/showthread.php?129167-Fitting-an-SXi-Gear-Knob
i didnt need a new one of them white things, came off easy without breaking too
Top man :) feel the green blob love :)
glad i could be of assistance :)
scott.parker
04-02-10, 05:46 PM
Fook that lol would've meant id have to actually finish building it first!
Yeah but the money your spending on this is adding up to maybe more then it would of on that nova! ;)
Yeah but the money your spending on this is adding up to maybe more then it would of on that nova! ;)
Hmm dunno Scott, made a tidy £8k back from that selling literally every last nut & bolt! Had £300+ of ebay fees in one month :cool:
Thank Ade :) had these arrive tother day, will really get the Corsa C guys backs up come PV lol lol
http://i80.photobucket.com/albums/j181/mikenova/Random/png.jpg
Just gotta figure out where to put them...thinking under the side repeaters ala "GTR" badges on Skylines.
Swapped the aerial seal over this afternoon before the old one completly dies lol as TBH its proper fooked
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1132.jpg
Super stubby aerial :)
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1133.jpg
Spot the clean bit
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1134.jpg
vaughanmc
25-02-10, 06:41 PM
PNG sticker ;)
dj_wudgey
25-02-10, 06:43 PM
the new stickers arent bad lol
I really like the new stickers TBH. Was gonna put it on the top of the rear screen, but there over an inch of black on the glass edge so it wouldnt really be visible at all.
Found a bloke in Stafford breaking a Corsa C van on Thursday so paid him a visit on Friday an then again earlier today.
Picked up a clean & straight drivers side door for £35 complete with glass, door card, handle etc so hoping to eBay the non used parts on an make the door pay for itself. Stripped it down to a carcass...
Heavy duty new age GM security! Barrel mounted into a hefty metal plate!
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1138.jpg
SXi silver door realeses, better then naff spec black ones.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1137.jpg
Picked up a good condition steering wheel & a rocker cover off him today for £20 (my wheel has a chunk missing & ive put a teeny tiny crack in my plastic rocker cover an its now seeping oil)
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1141.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1142.jpg
Got a bit bored Sunday, dug out some half empty tins of Glacier white & body coloured the (now) spare door handle to see how they come up, decided on doing all 3 handles on the car the same, one day.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1139.jpg
2 coat of white, needs 3rd.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/100_1140.jpg
Also picked up some facelift rear foglights for my other rear bumper, just need the archs for it, adapt the rear loom, prep & final paint & it can be fitted. Just need a bonnet now & its off to the bodyshop with the panels.
Simple cheap mods FTW.
Still looking for one myself.
Simple cheap mods FTW.
Still looking for one myself.
Go on eBay an search Corsa van in "cars/automobils" :eek: how over priced!!
Ill be selling this one in September time when the insurance is up, want something slightly bigger/newer.
Cracked on with some remedial works this afternoon, changed a few popped bulbs (raided my stash of Nova bulbs lol) an finally got round to fitting the arm rest after getting dead arm from driving back from Lee's late last night.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/ABCD0007.jpg
Still not fitted the SRi handbrake lever....tis on the "to do" list...
And got jiggy with it earlier.
CBA with changing the entire handbrake lever for my SRi one, as i realised you can actually just remove the handle/grip part an swap them over :)
(decided to test the Blackberry's camera out, to find its pretty shÃ*t lol)
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00003.jpg
And back on again...
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00004.jpg
Gave it a test "yank" an he works fine....gave it another test "yank" an hey presto, the handbrake cable snapped........ársebiscuits.
Yet another job, for another day.
djbrowney
05-04-10, 03:38 PM
lol lol lol lol lol lol lol lol lol lol lol lol lol lol lol
General Baxter
05-04-10, 03:54 PM
did your father never tell you, dont pull it so hard, it will break lol
Fit the filter lol
Me & the bro in law tried to yesterday lol turns out the diameter of the AFM is BIGGER!!!! Then the inlet of that filter! So i needs some silicone hose adapter for it lol
Sorted the handbrake cables tho, the lovely Leanne came up trumphs, picking up a pair from her work tomorrow on a trade price, eqautes to about £9 each :cool:
Im liking that arm rest Mike!
How hard was it to fit? any idea if theirs one available for my more-whore? :p
Im liking that arm rest Mike!
How hard was it to fit? any idea if theirs one available for my more-whore? :p
Took about 3 seconds to fit with a mini bosch drill driver. Only crap thing is its either cup holder & no armrest, or armrest an no cup holder :( as it sits right ontop of it :(
Now i have to drive around holding a mug of coffee every morning lol
Took about 3 seconds to fit with a mini bosch drill driver. Only crap thing is its either cup holder & no armrest, or armrest an no cup holder :( as it sits right ontop of it :(
Now i have to drive around holding a mug of coffee every morning lol
lol, Ahh well, win some loose some
Any idea if theirs one to fit a Corsa B? Or are they universal?
You can get universal ones yeah, but im sure Corsa B centre console are about an inch long lol so theres nothing to fit it too like?
They end at the back of the gear gaitor lol
Might have to drille through the chassis, really dont want to do that, i dont even have cup holders lol
Mike! Still have this sri headlight here chap! You goin the national day?
Mike! Still have this sri headlight here chap! You goin the national day?
Oh fcuk yeah lol yes mate will be at national defiently, will be escorting the loonaque there :thumb:
cool, i'll bring it with me. :)
FPSML @ testing the handbrake lol lol lol
FPSML @ testing the handbrake lol lol lol
Was doing it on the drive lol so its all legal ;)
cool, i'll bring it with me. :)
Top stuff John :thumb:
I just found it funny how you perfectly described it. lol
"Yank, yeah feels ok, yank, snap, oh bollocks" lol
I just found it funny how you perfectly described it. lol
"Yank, yeah feels ok, yank, snap, oh bollocks" lol
Oooh lol guess youve snapped hand brake cables whilst showing ya talent off then lol
In my old SR, doing some J Turns, went to do another & ripped the handbreak lever off its rachet mountings at 30 mph :(
Cleaned him for the first time since about September yesterday :) gave the bodywork some AutoGlym goodness & got a bit bored so took the rub strips off.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00005.jpg
New rear wiper blade & gave some of the scratchs a bit of T-Cut action. Plans for today are some immense bodywork detailing being as its 10.30am and already 18c outside 8)
Im stuck in limbo, weather to move out again or get him some driveway company :(
pikey1986
11-04-10, 11:41 AM
get him some company, its boring having only 1 car lol
get some wheels on him he looks rather sad rolling on steels lol
Already on the cae of rimmage :) Corsa C SRi 5 spokes :thumb:
He has company sometimes, just its a crappy 1.0 12v Corsa C. Might be having a more permanent company some time soon tho.
So fresh & so clean!
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00006.jpg
And he might have some new shoes & ears by the end of the week :)
More fannying about today :D got both rear handbrake cables for £10.27 inc VAT an got them fitted after work at 11am today.
Original GM one's have faired well for 124009 miles lol lol
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00008.jpg
Whilst i was under there poking around a realised the exhaust has rotted thru :( so made a quick call to a certain lady an got a new replica GM exhaust system arriving on Wednesday for £34 :) Result.
Mike, why dont you just stop fannying around and buy an already converted XE Nova, rag it around for a year, and then sell it. Its not as if its going to depreciate, you wont get fed up with building it because you wont have to build it and if you buy a ropey one and do it up, you might even make a few bob? :)
Im sorely tempted to buy K95 VHD but Id end up breaking it for a lot more then 3100 lol lol
I dont know Lee, ive been out an looked a fook loads of cars now (3 RX7's, 1 BMW 330 E46, 2 106 GTi's, a Cat D Astra Twin top, 2 Astra Coupe's, another MX5) an nothings really taking my fancy right now :(
nothings really taking my fancy right now :(
Thats the beauty of a pre converted XE. You know them, you wont need to spend months building it and get bored, and if you decide you cant be assed with it after a few months, you can sell it for the same as you bought it, or break it and make money. Show me a negative in that?? lol
Thats the beauty of a pre converted XE. You know them, you wont need to spend months building it and get bored, and if you decide you cant be assed with it after a few months, you can sell it for the same as you bought it, or break it and make money. Show me a negative in that?? lol
Good point/s. If anything, I want that Astra Sportive SE van back I crashed, she was lurvly!!!
Altho I always make money on cars :thumb: ;)
Just get a Nove for the show season, you know you want to. :)
Just get some spinners for Bread Van for the show season, you know you want to. :)
Thats not such a bad idea........
even MORE mincing lol had both rear drums off today to sort out the error i made yesterday lol handbrake was pretty much permenantly on as i was hoping that id adjusted enough on the cable to not have to open up the drums an mess in there. I was mistaken :(
Probably a good thing tho, the rear shoes are paper thin & in dire need of replacements so ordered a set of them.
Shoes & exhaust are ready for collection tomorrow :) just leaves the indicator wiring problem & fuel temp sensor then its off for MOT/Tax
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00009.jpg
Aye, done dusted :) his new wheels should be arriving this week :D
Some pretty special rims at that ;)
Done a bit more this week.
Picked my exhaust & rear shoes up on Wednesday night & got cracking with the back box Thursday afternoon.
Had to resort to using a 110v disc cutter to get the damn thing off after beating it with a hammer wouldnt work :(
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00016.jpg
Pic doesnt really do justice quite how big the hole actually is under the exterior skin of metal, the secondary skin of steel has completly disintergrated to dust!
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00013.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00012.jpg
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00011.jpg
Done. Thank fcuk.
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00014.jpg
Also its been confirmed that my rims wont be here till 18th (ish) of May :( there currently at a machine shop down South having the centre hole widened & wont be sent to me until the guy Ive bought them off is back from his holiday (5th May) which leaves me about 4 weeks to get 4 rare as rocking horse shÃ*t rims refurbed, diamond cut, tyres on & balanced!
scott.parker
18-04-10, 12:50 AM
lol i love how you have modded this little van, it's quite cool really..
But i still think you should get another nova, but buy one that already done (or half way there) etc.
Scott
lol i love how you have modded this little van, it's quite cool really..
But i still think you should get another nova, but buy one that already done (or half way there) etc.
Scott
lol lol cheers mate :) ive been doing a bit more today, mostly with a hammer & block of wood getting some of the dents out then fillering them out. But the Glacier white paint ive used doesnt seem to match the bodywork at all :(
These arrived today :)
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00018.jpg
And picking up some SXi+ side skirts later tonight :)
Nice wheels choice Mike :cool:
Nice wheels choice Mike :cool:
Cheers mate
Genuine 1997 15 inchers :) just need minor TLC. I might have another set of 4 soon along with another set of 4 15" TH's so ill have a bit of choice lol lol
Haha retro rims on a modern ride :thumb:
Haha retro rims on a modern ride :thumb:
LOL I do miss my TH's though :( they were properly nice rims.
General Baxter
21-04-10, 05:25 PM
stop messing about with the ****box diesel lol
stop messing about with the ****box diesel lol
Might not be turbo diesel for much longer :p
:)
http://i80.photobucket.com/albums/j181/mikenova/The%20bread%20van/IMG00041.jpg
Happy days :)
pikey1986
18-05-10, 10:25 PM
very nice mike
They came out lovely mate :)
There not perfect, far from it, but there only going on a bleeding van & are much better then the norm of Corsa C SRi rims (the chunky 5 spoke one, fetch 300+ a set :S - to many retarded college kids with credit cards on that CCUK site!)
Also got some more goodies coming for a reet steal so meh lol
EDIT: BTW that pic isnt the finished article, there still yet to be buffed & lacquered :)
Apparently lacquering polished rims is a no go mike, if you search my recent posts for "lacquer" you should find the thread I think. If not shout at me and I'll see if I can find it lol
Apparently lacquering polished rims is a no go mike, if you search my recent posts for "lacquer" you should find the thread I think. If not shout at me and I'll see if I can find it lol
http://icanhascheezburger.files.wordpress.com/2007/05/orly.jpg
Just checked your threads & canney find nowt??
http://www.pngclub.com/forum/showthread.php?t=139793&page=2&highlight=lacquer
Post 16 onwards
http://www.pngclub.com/forum/showthread.php?t=139793&page=2&highlight=lacquer
Post 16 onwards
lol was just reading that as i just found it lol
Arsebiscuits, how the hell am I gonna keep the bare alloy bit clean without having to take them off every 5 miles & polish out any corrosion :S
EDIT: My mate had some polished lip rims on his Civic & his were lacquered from the factory tho??
I hold up my hands up at this point and say I know nothing, it pissed on my parade too lol
**** it ill sell them after PV them lol some one elses problem lol lol lol
Vaseline. And i'm not Joking :)
Vaseline. And i'm not Joking :)
OooOoOooOOooo save that for the weekend darling :thumb:
You being properly for real Lee??
Yup. Give them a polish with some proper aluminium stuff, and then spread a very thin veneer of vaseline on.
Only downside is it picks up dirt a bit more obviously, but they wont tarnish :)
Oooh will have to try that one then :)
The spoked area will still be getting a treatment of lacquer tho, make it super duper shiny like. Just means ill have to wesh the van :( so it all looks clean :(
...and then spread a very thin veneer of vaseline on.
Lee, the Vaseline expert :gay:
;)
Well its official..... the Bread Van is for sale soon :cry::cry::cry:
The nice people at 'jitsu are giving me a brand spanker company van :d and I now have no more room left for anymore cars at all :tard: so I gotta sell it :cry:
Not amused :(
The nice people at 'jitsu are giving me a brand spanker company van :d
FLOL, someone is giving Mike a van to drive that he doesn't own or have to fix. Sweepstake on time of imminent death? lol
scott.parker
27-07-11, 06:41 AM
Surly selling the van is good, as the Corsa get finished?
Surly selling the van is good, as the Corsa get finished?
Good theory lol probably wont happen though lol
Mark, I cant trash there vans, sadly, if I fcuk up, Ill get fcuked up :(
FLOL, someone is giving Mike a van to drive that he doesn't own or have to fix. Sweepstake on time of imminent death? lol
i rang round & no bookies are taking bets...
Mark, I cant trash there vans, sadly, if I fcuk up, Ill get fcuked up :(
So, give it about a week then? lol
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.