what bodies

[16v Nova Kev]

Opel/VX 2.0L + TBs 27° / 34° / 0° Does not include water elbow CKVX03 / 4 / 5 £ 677.20
Opel/VX 2L + taper SFs Does not include water elbow CKVX07 £ 981.50
http://i244.photobucket.com/albums/gg8/16vnovakev/bodies2-1.jpg

http://i244.photobucket.com/albums/gg8/16vnovakev/bodies1-1.jpg

both plus vat and delivery/loom/management/swirl pot

[philip]

top ones, they give slightly better power compared to the other ones due to the angle of flow. also alot more precise when comes to accurately setting up:thumb:

[16v Nova Kev]

cool the top ones are the taper ones i put the pics in the wrong order. cant decide on management tho wanted to use mega squirt

[philip]

honestly matey, dont wreck a good set of carbs with a poor management, spend the extra on dta, omex, emrald etc etc.

the taper bodies(top pic) also make fitting easier and better air flow

[16v Nova Kev]

alright cheers
rep:thumb:

[peester]

well there can be advantages to parallel bodies too.. not neccessarily tapers are the best full stop..
with the righ trumpets and sizes its possible to see better low end torque from parallels...

[Adam]

Plus they are easier to setup/balance

[16v Nova Kev]

hmm interesting. could not figure out the dth ones in the list

[Adam]

QED sell dth bodies

[astradaryl]

honestly matey, dont wreck a good set of carbs with a poor management, spend the extra on dta, omex, emrald etc etc.

the taper bodies(top pic) also make fitting easier and better air flow

you get what you pay for :thumb:

[16v Nova Kev]

http://qedmotorsport.co.uk/qed-shop/vauxhall-xe-c20xe/fuel-injection

not a bad price

[16v Nova Kev]

http://i244.photobucket.com/albums/gg8/16vnovakev/throttle-bodies-qed-direct-to-head.jpg

475 plus vat

[Big_Chap]

i have QED dth running DTA, no complaints... theres a good wee mapper down irvine/dreghorn way too!

[16v Nova Kev]

mmm cool whats yours at the wheels

[Big_Chap]

181 iirc

*edit* before the bs police storm in, thats not just bodies....

[16v Nova Kev]

thats a good figure i will need to get a look at it sometime

[skidmarkz]

Top set of Bodies possible for sale....

http://www.pngclub.com/forum/showthread.php?t=129733

[Stuart]

Ms isnt that bad. its jsut the fact that retards have a go at setting them up and FAIL then bad mouth it.

[Rick Draper]

There are also the AT power DTH TB's.

[burgo]

honestly matey, dont wreck a good set of carbs with a poor management, spend the extra on dta, omex, emrald etc etc.

the taper bodies(top pic) also make fitting easier and better air flow

the management is only as good as the mapper. i personally love megasquirt, tis so easy to use and ive learned funk loads

[Big_Chap]

thats a good figure i will need to get a look at it sometime

yeah was a little higher than I expected, probably bump into you up knockhill/crail

[16v Nova Kev]

the management is only as good as the mapper. i personally love megasquirt, tis so easy to use and ive learned funk loads

cheap to and looks like i could play with it too:thumb: