View Full Version : Urgent Help Please!
scott.parker
02-09-09, 06:20 PM
URGENT HELP NEEDED!
My wiper motor has packed in, and i need one for combe at the weekend, so i have identified it as a Corsa B/C motor, but now need help, does anyone know if the Corsa B's in these pics will fit/work OK, as they have an extra bit mine does not (might be an intermittent switch built in etc)
Need to order one tonight for it to get here for Friday, or im coming in the Yellow 1.2 lol
Here's mine on the car now.
http://img168.imageshack.us/img168/6774/dscf0216small.jpg
http://img299.imageshack.us/img299/23/dscf0661small.jpg
Now this is a Corsa C one i found on ebay.
http://i.ebayimg.com/19/!B(h)WyQ!mk~$(KGrHgoOKioEjlLme88sBKcwP2YP)g~~_12.J PG
http://i.ebayimg.com/20/!BZZ0eu!Bmk~$(KGrHgoOKjUEjlLmTEG6BKmnekVoBw~~_12.J PG
Same as i have fitted, so now i need to know will one of these Corsa B type one's work also (there cheaper you see)
http://i.ebayimg.com/19/!BYw)nHwBGk~$(KGrHgoH-CoEjlLl)2U9BKjTSJT)pQ~~_12.JPG
http://i.ebayimg.com/08/!BSPMJf!!mk~$(KGrHgoH-CUEjlLlvzuyBKCJdIOJ9Q~~_12.JPG
Please if any one knows let me know ASAP!
Scott
yours looks like a nove one mate.
If so i have one in the lockup you can have for free.
If you fancy a road trip.
Im out tonight tho.
If worst comes to worst, swap the one off the 1200 over and try it out, if it works youre sorted, wont take long to find out and of not order a new one or go for a mission the christian's lol
an early nova has a differant plug spud.
scott.parker
02-09-09, 06:31 PM
First thing i did mate was check the mk1 lol
an early nova has a differant plug spud.
First thing i did mate was check the mk1 lol
Ill go and sit in the wrong corner now then lol
Got one here but i aint exactly local
Carnt see why it wouldn't work scott although you may have to make a bracket for it to mount to. they all work in more or less the same way although someone else feel free to correct me:wtf: .
There all the same sorta design between the 3, but the mouting place may slighty differ. I have a corsa one fitted to the nova, it just sits up a bit lol
scott.parker
02-09-09, 08:00 PM
Right im proper pissed off!
Been out in the poring rain to look at it again, and now im certain that the motor is seized, as the water is running along the linkage and then dripping right onto the motor ware the join is between the end cover (black) and the motor part (silver)
http://img168.imageshack.us/img168/6774/dscf0216small.jpg
And IMO it's been dripping onto it over a long time and worked the water between the join and has ****ed it!
There was a patch of dry rusty water marks last time i looked, but i though nothing of it, in fact i have a pic.
http://img9.imageshack.us/img9/3651/dscf0070small.jpg
Conclusion, wiper motor is needed and need to have it to fit for Friday night, early Sat morning!.. :mad: :mad:
The bottom one is a corsa b.
The corsa motor will have a black purple wire, this is the speed linked wipe, just leave it off. Mine work fine.
A nova one will fit and work tho.
Try filling it with wd40 or other penetrating oil overnight scott, worth a try cos you might find it frees up and works by the am:thumb:
scott.parker
02-09-09, 08:08 PM
Try filling it with wd40 or other penetrating oil overnight scott, worth a try cos you might find it frees up and works by the am:thumb:
lol Top idea, but it would be washed out of it before i could spray it in and screw it back together.
Anythings worth a try dude seriously, you just might get lucky and free it up for nothing:thumb:
there must be someone local with one for you.
as adam and ernie have said ive got one you can have but we arnt the localest of people.
scott.parker
02-09-09, 08:11 PM
I'll try it tomo now mate, it's pissing dogs and bins, and it's getting dark, I'll end up loosing screws in the dark knowing my luck.
scott.parker
02-09-09, 08:14 PM
Humm...
I have an idea, my mate might be able to lend me his!
Right if worse come to worst them i can borrow Mike's motor he's just said i can.
Email colin smith and ask if he can do one first class, top guy im sure he will.
craig green
02-09-09, 09:12 PM
Potentially highlighted an issue there with these motors up on the open scuttle tray.
Firewall FTW.
Potentially highlighted an issue there with these motors up on the open scuttle tray.
Firewall FTW.
But the water would be running down thru the scuttle cut out...:confused:
mine has been there since it was built in feb.Its been through the snow wind and rain and still works fine.
Firewalls suck a'#e..
http://img.photobucket.com/albums/v617/chunny01/JDL%20Project/004-11.jpg
Is you fixed it yet scott?
scott.parker
04-09-09, 09:05 PM
Yes i have, i'll post pics in bit, as im not on my pc.
Scott
Spot on good work dude:thumb:
scott.parker
04-09-09, 09:28 PM
Just need to replace my temp sender unit tomo (either in the morning or at combe) lol
scott.parker
04-09-09, 10:24 PM
Pics
So i removed the cover (found out how it works) has two magnets in it etc.
http://img193.imageshack.us/img193/8168/dscf0261x.jpg
See the water damage, looks like there was allot of water built up inside the motor for a while now.
http://img215.imageshack.us/img215/8602/dscf0263.jpg
http://img197.imageshack.us/img197/5414/dscf0264b.jpg
So i rubbed it down with a wire brush, cleaned the magnets out in the cover, and then put it together again with some sealant round the edge, then added some more on the outside joint.
http://img196.imageshack.us/img196/9493/dscf0265e.jpg
All good, I'm quite chuffed with my handy work too! lol lol
Scott
Good times, you repaired and resealed your existing unit then i take it, good lad, budget repairs/performance FTW:thumb:
scott.parker
04-09-09, 10:38 PM
Yep it's the same one, i just cleaned it, put back together with sealer on it etc, works a treat!
Good lad, another expense saved, "heres one i made earlier" lol
Scott you nerd, why fix it? I wanted to see your yellow one baby :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.